Previous year question paper for ED2 (Diploma Civil Engineering 1st-2nd)

Engineering Drawing-2

Previous year question paper with solutions for Engineering Drawing-2 from 2012 to 2012

Our website provides solved previous year question paper for Engineering Drawing-2 from 2012 to 2012. Doing preparation from the previous year question paper helps you to get good marks in exams. From our ED2 question paper bank, students can download solved previous year question paper. The solutions to these previous year question paper are very easy to understand.

 1. Detail and Assembly Drawing (01 sheet)

1.1 Principle and utility of detail and assembly drawings

1.2 Practical exercise on drawing from detail to assembly or vice versa

using wooden joints as example

 2. Threads (01 sheet)

2.1 Nomenclature of threads, types of threads (metric). Single and

multiple start threads

2.2 Forms of various external thread sections such as V, Square,

Acme, Knuckle, Metric, Seller and Buttress thread

2.3 Simplified conventions of left hand and right hand threads, both

external and internal threads

3. Nuts and Bolts (01 sheet)

3.1 Different views of hexagonal and square headed bolts and nuts

3.2 Application of nuts and bolts with washers

 4. (4.1) Locking Devices (02 sheet)

 4.1.1 Lock nuts, Castle nuts, Sawn nuts, Split pin lock nut

4.1.2 Spring washers, Locking plates.

 (4.2) Screws, Studs and Washers (01 sheet)

4.2.1 Drawing various types of machine screws

4.4.2 Drawing various types of studs

4.4.3 Drawing various types of washers 

42

                                                                                         Section III

5. Keys and Cotters (02 sheets)

 Various types of keys and their application. Preparation of drawings of

various keys and cotters

5.1 Various types of joints

 - Sleeve and Cotter joint

 - Kunckle joint

 - Spigot and Socket joint

 

6. Coupling (02 sheets)

 6.1 Flange coupling (protected and unprotected coupling)

6.2 Pin type flexible coupling

6.3 Muff coupling

Section IV

7. Rivets and Rivetted Joints (02 sheets)

7.1 Types of general purpose rivet heads

7.2 Types of rivetted joints - lap, butt (single cover plate and double

cover plate), chain and zig-zag riveting.

7.3 Caulking and fullering of rivetted joints.

8. Development of surfaces, cube, prism and funnel (01 sheet)

9. Intersection of surfaces, cylinder to cylinder, cylinder to cone and prism.

 (01 sheet) 

2012
Download