Solved question paper for SUR-1 May-2010 (DIPLOMA 3rd)
Solved Question Paper
Surveying-1 May-2010
PSBTE • DIPLOMA • Cvil Engineering • 3rd • May-2010
SUR-1 for Punjab State Board of Technical Education Diploma in Engineering is the subject page where students can find subject-wise previous year question papers for Surveying-1 in the 3rd semester of Civil Engineering. These old papers help with revision, repeated questions, and understanding the exam pattern before the exam. Use this page to practice with Civil Engineering semester papers, review commonly asked topics, and prepare more confidently. BRpaper is not the official website of the Punjab State Board of Technical Education or any university or board, but it helps students access previous year papers and exam preparation material in one place.
Solved Questions
Solved-
In survey, when work is done from part to whole, the smaller errors are _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
In ranging, the end stations are not intervisible.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
May 2022 In Reciprocal Ranging, the end stations are not intervisible.
-
-
______ is the most accurate method of measuring distances.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2007 __________ is used for accurate measure of distances.
-
-
Cumulative error is _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
The sum of interior angles of a regular hexagon is _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
In prismatic compass, zero is always marked at ______ end.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
______ meridian changes its position with time.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
If fore bearing of a line is S 40° E, B.B. is _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Plane table surveying is ______ than theodolite surveying.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Traversing is the method of plane tabling.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Alidade is used for orienting the _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
When leveled, a level provides a line of sight.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Mean sea level is the _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
One smallest division on ISI leveling staff is _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Leveling should always commence from a _______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2019 Leveling should always commence from a
-
Dec 2019 Levelling should always start from a _____.
-
Dec 2017
Leveling work should always commence from a---------------
-
Dec 2011 Leveling work should always commence from a ________.
-
-
Differentiate between plane and geodetic survey.Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Differentiate between plane and geodetic surveying.
-
-
Explain whole circle and reduced bearings.Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
Explain magnetic declination.Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
May 2020 Explain magnetic declination and magnetic dip.
-
May 2008 What do you mean by magnetic declination?
-
Dec 2005 What do you understand by Magnetic dip and declination? Explain.
-
-
What is a two point and three point problem?Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
May 2019 Explain three point problem.
-
Dec 2019 What is three-point problem?
-
Dec 2016 What is meant by two point problem?
-
May 2009 What is three point problem?
-
-
Explain method of orienting a plane table.Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2019 What is orientation of plane table? Write its methods.
-
May 2017
Describe the method of orientation of plane table.
-
May 2016 Describe the method of orientation of plane table.
-
May 2010 Orientation of plane table
-
Dec 2007 Explain orientation in plane tabling.
-
-
What is foresight, backsight and intermediate sight reading?Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
Explain line of collimation and axis of level tube.Short Answer 5 Marks May-2010 • PSBTE DIPLOMA
-
Explain base line, tie line, check line.Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2019 What is Base line, Check Line and tie line.
-
-
A metallic tape originally 20 m is now found to be 20.2 m. A house 30 m x 20 m is to laid out. What measurements must be made using this tape? What should the diagonal read?Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
-
What is local attraction? How is it detected and measured?Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 What is local attraction? How is it detected?
-
-
The following are the bearings of lines of a closed traverse ABCD: AB N 56°-10' E, BC S 50°-40' E, CD S 19°-50' W, DA N 70°-40' W. Calculate interior angles of traverse.Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
-
May 2022 Following are the Bearings of lines of closed traverse ABCD,\r\n\r\nLINE | FORE BEARING\r\nAB | N56°10′E\r\nBC | S50°40′E\r\nCD | S19°50′W\r\nDA | N70°40′W\r\n\r\nCalculate the Interior angles of Traverse and apply the necessary check.
-
Dec 2015 Calculate the interior angles of a traverse with the following observed bearings, also apply the check. Line AB 40° 15’; BC 118° 15’; CD 176° 0’; DA 284° 30’.
-
May 2010 Calculate the interior angles of a traverse with the following observed bearings: AB 40° 15’, BC 118° 15’, CD 176° 0’, DA 284° 30’.
-
-
Orientation of plane tableShort Answer May-2010 • PSBTE DIPLOMA
-
Dec 2019 What is orientation of plane table? Write its methods.
-
May 2017
Describe the method of orientation of plane table.
-
May 2016 Describe the method of orientation of plane table.
-
May 2010 Explain method of orienting a plane table.
-
Dec 2007 Explain orientation in plane tabling.
-
-
Re sectionShort Answer May-2010 • PSBTE DIPLOMA
-
Triangle of errorShort Answer May-2010 • PSBTE DIPLOMA
-
AlidadeShort Answer May-2010 • PSBTE DIPLOMA
-
Describe the temporary adjustments of a level.Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
-
May 2021 Describe the permanent adjustments of a level.
-
Dec 2005 List the temporary adjustment of level.
-
-
The following series of readings of back sights and foresights was taken in a fly leveling. The first reading was taken on a point of RL 100.000 m. Draw a page of leveling field book and enter readings on it. Find RL of all the points. Apply check. 1.235, 1.396, 2.345, 1.986, 2.148, 0.735, 0.325, 2.568, 1.465, 2.435, 1.356, 0.768, 1.985, 2.655Long Answer 15 Marks May-2010 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SUR-1 Surveying-1 previous year question papers?
You can use this subject page to look for SUR-1 previous year question papers for PSBTE Diploma Civil Engineering 3rd semester.
02 Are these papers useful for revision before the exam?
Yes, old papers help you revise important topics, practice common question styles, and understand the exam pattern.
03 Does this page include solved papers?
This page is mainly for previous year question papers and exam preparation material. Solved papers may not be available for every paper.
04 Can I use these papers to check repeated questions?
Yes, previous year papers are useful for spotting repeated questions and commonly asked areas in Surveying-1.
05 Is BRpaper the official website of PSBTE?
No. BRpaper is not the official website of the Punjab State Board of Technical Education. It only helps students find previous year papers and related preparation content.