Solved question paper for SUR-1 May-2010 (DIPLOMA 3rd)
Solved Question Paper
Surveying-1 May-2010
PSBTE • DIPLOMA • Cvil Engineering • 3rd • May-2010
SUR-1 for Punjab State Board of Technical Education Diploma in Engineering is the subject page where students can find subject-wise previous year question papers for Surveying-1 in the 3rd semester of Civil Engineering. These old papers help with revision, repeated questions, and understanding the exam pattern before the exam. Use this page to practice with Civil Engineering semester papers, review commonly asked topics, and prepare more confidently. BRpaper is not the official website of the Punjab State Board of Technical Education or any university or board, but it helps students access previous year papers and exam preparation material in one place.
Solved Questions
Solved-
The object of surveying is to prepare map or plan.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Generally area less than ______ are treated as plane.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
In case of river vision is ______ but chaining is obstructed.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2019 In case of river, vision is free, but is obstructed _____.
-
May 2017
In case of river vision is free but ……………..is obstructed
-
May 2016 In case of river vision is free but ……………..is obstructed.
-
-
The errors which occurs in directions are called ______ error.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
The difference between true bearing and magnetic bearing of a line is ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
May 2009 What do you mean by true and magnetic bearing of a line?
-
-
The line passing through points at which magnetic declination is equal at a given time are called ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
The surface tangentical to level surface is said to be a ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
The effect of refraction in ______ to the staff reading.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2019 The effect of refraction is to the staff reading
-
-
The alidade provides in the plane table surveying.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2016 The alidade is used for centering plane table surveying.
-
Dec 2005 The alidade provides _______ in plane table surveying.
-
-
Tracing paper method is also known as ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
What is surveying? What is the purpose of surveying?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2021
What is work of a surveyor?
-
May 2016 What is surveying? What for is it done?
-
-
Differentiate between plane and geodetic surveying.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Differentiate between plane and geodetic survey.
-
-
What do you mean by reconnaissance?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
Differentiate between cumulative and compensating errors.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
What is the difference between direct and reciprocal ranging?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
Differentiate between chain survey and compass survey.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2022 Differentiate between Chain Surveying and Compass Surveying.
-
Dec 2017
Write down the difference between Chain Surveying and Compass Surveying.
-
Dec 2016 Write down the difference between chain surveying and the compass surveying.
-
Dec 2015 Write down the difference between Chain Surveying and Compass Surveying?
-
-
What is local attraction? How is it detected?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 What is local attraction? How is it detected and measured?
-
-
Differentiate between W.C.B. and quadrantal bearing.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
What is bench mark? Give their classification.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
Write the instructions for staff man.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
Explain the terms: back sight.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Explain the terms: fore sight.
-
-
Explain the terms: fore sight.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Explain the terms: back sight.
-
-
Explain the terms: intermediate sight.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
What do you mean by plane tabling? When is it recommended?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
State the disadvantages of plane tabling.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
What do you mean by the term orientation of plane table? Why is it done?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
The length of a line was measured with a 30 m chain and found to be 1200 m. The length was again measured with a 20 m chain and found to be 1199 m. On testing the 30 m chain it was found to be 10 cm too short. Find the actual length of 20 m chain.Long Answer 10 Marks May-2010 • PSBTE DIPLOMA
-
May 2021 The length of line measured with 30m chain was found to be 4920m if the chain was 0.2 link too short, find the true length of the line?
-
May 2019 A 20m chain was found to be 10 cm short after chaining a distance of 2240m. It was correct before the start of work. Find the true length of line measured.
-
-
Calculate the interior angles of a traverse with the following observed bearings: AB 40° 15’, BC 118° 15’, CD 176° 0’, DA 284° 30’.Long Answer 10 Marks May-2010 • PSBTE DIPLOMA
-
May 2022 Following are the Bearings of lines of closed traverse ABCD,\r\n\r\nLINE | FORE BEARING\r\nAB | N56°10′E\r\nBC | S50°40′E\r\nCD | S19°50′W\r\nDA | N70°40′W\r\n\r\nCalculate the Interior angles of Traverse and apply the necessary check.
-
Dec 2015 Calculate the interior angles of a traverse with the following observed bearings, also apply the check. Line AB 40° 15’; BC 118° 15’; CD 176° 0’; DA 284° 30’.
-
May 2010 The following are the bearings of lines of a closed traverse ABCD: AB N 56°-10\' E, BC S 50°-40\' E, CD S 19°-50\' W, DA N 70°-40\' W. Calculate interior angles of traverse.
-
-
The following consecutive readings were taken with a level. The level was shifted after 4th, 7th and 10th readings. The first reading was taken on a B/M of R.L. 150.000 m. Draw out a page of level book, enter the readings and calculate the R.L. of all the points by collimation method: 1.520, 0.965, 1.475, 1.545, 1.915, 0.860, 1.790, 1.365 and 1.135.Long Answer 10 Marks May-2010 • PSBTE DIPLOMA
-
State the three point problem. Explain in detail how it is solved by graphical method.Long Answer 10 Marks May-2010 • PSBTE DIPLOMA
-
Describe the two peg method of permanent adjustment of a dumpy level.Long Answer 10 Marks May-2010 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SUR-1 Surveying-1 previous year question papers?
You can use this subject page to look for SUR-1 previous year question papers for PSBTE Diploma Civil Engineering 3rd semester.
02 Are these papers useful for revision before the exam?
Yes, old papers help you revise important topics, practice common question styles, and understand the exam pattern.
03 Does this page include solved papers?
This page is mainly for previous year question papers and exam preparation material. Solved papers may not be available for every paper.
04 Can I use these papers to check repeated questions?
Yes, previous year papers are useful for spotting repeated questions and commonly asked areas in Surveying-1.
05 Is BRpaper the official website of PSBTE?
No. BRpaper is not the official website of the Punjab State Board of Technical Education. It only helps students find previous year papers and related preparation content.