Solved question paper for SUR-1 May-2019 (DIPLOMA 3rd)
Solved Question Paper
Surveying-1 May-2019
PSBTE • DIPLOMA • Cvil Engineering • 3rd • May-2019
SUR-1 for Punjab State Board of Technical Education Diploma in Engineering is the subject page where students can find subject-wise previous year question papers for Surveying-1 in the 3rd semester of Civil Engineering. These old papers help with revision, repeated questions, and understanding the exam pattern before the exam. Use this page to practice with Civil Engineering semester papers, review commonly asked topics, and prepare more confidently. BRpaper is not the official website of the Punjab State Board of Technical Education or any university or board, but it helps students access previous year papers and exam preparation material in one place.
Solved Questions
Solved-
The curvature of earth is ignored in ________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2016 Curvature of earth is not taken into account in __________.
-
-
A 20m chain has _________links.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2019 A 20 m chain is divided into _____ links.
-
-
Invar tape is used for _________ measurements.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2008 Invar tape is used for accurate measurement.
-
-
Reduced bearing is always less than _________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
F.B and B.B should differ by _________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
The least count of telescopic leveling staff is ________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2015 Least count of leveling staff is _________ meters.
-
-
Fore sight is _______ reading in setting of level.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
First step for setting of prismatic compass is ________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2018
First step for setting of prismatic compass is________.
-
-
Inaccessible points are located by _________method.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
In Chain Survey field notes are recorded on ________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 In chain survey field notes are recorded on _____.
-
Dec 2018
In Chain Survey field notes are recorded on __________.
-
-
1000M is equal to10km.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
The length of engg. Chain is 100ft.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
Height of instrument method is also called line of collimation method.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Height of Instrument method is also called ________.
-
Dec 2018
Height of Instrument method is also called Line of Collimation method.
-
Dec 2016 Height of instrument method is also called __________.
-
-
Invar tape is made of nickel and steel.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
Reduce bearing of line whose W.C.B is 312⁰ is N48W.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
Discuss in brief the principles of survey.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Explain Principles of surveying.
-
May 2022 Write down the basic principle of Surveying.
-
May 2021
What are the basic principles of surveying?
-
May 2021
What are principles of chain surveying?
-
May 2021 Explain the basic principles of chain surveying.
-
May 2020 Define surveying and state its basic principles.
-
Dec 2019 Basic Principle of Surveying.
-
Dec 2016 Define surveying. What are its basic principles?
-
Dec 2015 The basic principle of Surveying is to work from _____________.
-
Dec 2015 Define Surveying. What are its basic principles?
-
May 2008 Explain principle of chain surveying.
-
-
Write classification of survey according to instrument used.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2018
Write classifications of surveys according to instrument used.
-
-
Describe the different types of chains used in surveying.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2021 Describe the different type of chains used in surveying.
-
-
Define level line, line of collimation, benchmark, reduced level, and axis of telescope.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Define the following terms used in Leveling,\r\n(i) Line of Collimation\r\n(ii) Axis of Telescope\r\n(iii) Fore Sight Reading
-
Dec 2019 Define level line, line of collimation, benchmark, reduce level and axis of telescope.
-
-
Describe briefly various method of leveling.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Describe the various accessories of plane table surveying.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 What are the Instruments used in plane table survey.
-
May 2022 List various instrument used in Plane Table Surveying.
-
May 2020 List the various instruments used in plane table surveying and state their uses.
-
Dec 2019 Write name of various accessories used in plane table surveying.
-
Dec 2018
Write the name of various instruments used in plane table survey
-
Dec 2017
List the various instruments used in plane table surveying, what are their uses?
-
Dec 2015 List the various instruments used in plane table surveying, what are their uses?
-
-
Convert the following W.C.B to R.B: 75⁰.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Convert the following W.C.B to R.B: 150⁰.
-
-
Convert the following W.C.B to R.B: 150⁰.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Convert the following W.C.B to R.B: 75⁰.
-
-
Convert the following W.C.B to R.B: 211⁰ 30’.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Convert the following W.C.B to R.B: 312⁰.
-
-
Convert the following W.C.B to R.B: 312⁰.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Convert the following W.C.B to R.B: 211⁰ 30’.
-
-
State two point and three point problem.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2021 State two point and three point problem.
-
-
A 20m chain was found to be 10 cm short after chaining a distance of 2240m. It was correct before the start of work. Find the true length of line measured.Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
May 2021 The length of line measured with 30m chain was found to be 4920m if the chain was 0.2 link too short, find the true length of the line?
-
May 2010 The length of a line was measured with a 30 m chain and found to be 1200 m. The length was again measured with a 20 m chain and found to be 1199 m. On testing the 30 m chain it was found to be 10 cm too short. Find the actual length of 20 m chain.
-
-
What is local attraction? How it is detected and eliminated?Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
May 2017
What is Local Attraction? How is it detected and removed?
-
May 2016 What is local attraction? How is it detected and removed?
-
-
What are precautions while using a compass?Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
May 2021
What the different precautions to be taken while using the compass?
-
-
The following consecutive readings were taken with a level: 1.775, 1.835, 1.640, 0.975, 1.135, 1.545, 2.040, 2.710, 1.580, 1.435, 1.470 and 1.265. The instrument was shifted after 5th and 9th reading. Find out the RL of all the points by any method. The first reading was taken on the staff held on benchmark 200m.Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 The following consecutive readings were taken with the help of a dumpy level 1.805, 2.655, 3.905, 4.025, 1.960, 1.700, 1.595, 1.265, 2.255, 3.055, 2.590, 2.005, 3.040 the instrument was shifted after third, sixth and ninth reading. Calculate the R.L of all points by any method. The first reading was taken on the staff held on the bench mark of RL =100m.
-
Dec 2019 The following consecutive readings were taken with the help of a dumpy level: 1.805, 2.655, 3.905, 3.025, 1.960, 2.700, 1.595, 1.865, 2.255, 3.455, 2.590, 1.005, 3.040, 2.555. The instrument was shifted after third, sixth and ninth reading. Calculate the R.L. of all points by any method. The first reading was taken on the staff held on the Bench Mark of R.L. = 80 m.
-
May 2018
The followings consecutive readings were taken with the help of a Dumpy level : 1.904, 2.653, 3.906, 4.026, 1.964, 1.702, 1.592, 1.261, 2.542, 2.006, 3.145. The instrument was shifted after the 4th and 7th reading The first reading was taken on the staff held on the bench mark 100.000 m. Calculate RLs of all points. Apply check also.
-
May 2017
The following consecutive readings were taken with the help of a Dumpy Level:1.810, 2.110, 1.225, 1.455, 0.905, 2.435, 2.810, 2.075 and 1.765. The instrument was shifted after the fourth and seventh readings. The first reading was taken on the staff held on the B.M of R.L 100.000 metres. Calculate the R.Ls of the points and apply the arithmetical Check.
-
May 2016 The following consecutive readings were taken with the help of a Dumpy Level: 1.904, 2.653, 3.906, 4.026, 1.964, 1.702, 1.592, 1.261, 2.542, 2.006, 3.145. The instrument was shifted after the fourth and seventh readings. The first reading was taken on the staff held on the B.M of R.L 100.000 metres. Calculate the R.Ls of the points and apply the arithmetical check.
-
Dec 2016 The following consecutive readings were taken with dumpy level; 1.810, 2.110, 1.225, 1.455, 0.905, 2.435, 2.810, 2.075 and 1.765. The level was shifted after 4th and 7th reading. The first reading was taken on staff held on the bench mark of RL 50.000m. Calculate the RL of all points and apply arithmetic check.
-
-
Explain two point problem.Long Answer May-2019 • PSBTE DIPLOMA
-
May 2022 Explain two point problems.
-
May 2022 Explain the Two Point Problem with neat sketch.
-
May 2020 Explain in detail two point problems.
-
Dec 2019 Describe two point problems with neat sketch.
-
Dec 2017
Explain in details two point problems
-
Dec 2015 Explain in details two point problem.
-
-
Explain three point problem.Long Answer May-2019 • PSBTE DIPLOMA
-
Dec 2019 What is three-point problem?
-
Dec 2016 What is meant by two point problem?
-
May 2010 What is a two point and three point problem?
-
May 2009 What is three point problem?
-
-
Explain error in plane table survey.Long Answer May-2019 • PSBTE DIPLOMA
-
May 2021 What the different types of errors in plane table surveying and precautions to control them ?
-
Dec 2011 Explain different types of errors in plain table surveying. What are the precautions to be taken to overcome it?
-
May 2009 Explain the errors in plane table survey and precautions to control them.
-
-
State the method of reduction of levels. Discuss their merits and demerits.Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SUR-1 Surveying-1 previous year question papers?
You can use this subject page to look for SUR-1 previous year question papers for PSBTE Diploma Civil Engineering 3rd semester.
02 Are these papers useful for revision before the exam?
Yes, old papers help you revise important topics, practice common question styles, and understand the exam pattern.
03 Does this page include solved papers?
This page is mainly for previous year question papers and exam preparation material. Solved papers may not be available for every paper.
04 Can I use these papers to check repeated questions?
Yes, previous year papers are useful for spotting repeated questions and commonly asked areas in Surveying-1.
05 Is BRpaper the official website of PSBTE?
No. BRpaper is not the official website of the Punjab State Board of Technical Education. It only helps students find previous year papers and related preparation content.