Solved question paper for SM May-2022 (DIPLOMA 4th)
Solved Question Paper
Structural mechanics May-2022
PSBTE • DIPLOMA • Cvil Engineering • 4th • May-2022
SM stands for Structural Mechanics in the Punjab State Board of Technical Education Diploma in Engineering Civil Engineering 4th semester. On this page, students can find subject-wise previous year question papers and paper collection support for revision, practice, and understanding the exam pattern. Reviewing old question papers can help you spot repeated topics, important questions, and the way theory questions are usually framed. BRpaper is not the official website of the Punjab State Board of Technical Education or any board or university. It is a resource to help students locate question paper PDFs and prepare more confidently using semester-wise and subject-wise papers.
Solved Questions
Solved-
Define Elastic materials.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Define Stress.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Define Poisson's ratio.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
May 2020 Define Poisson’s ratio.
-
May 2019 Explain the term poisson’s ratio.
-
May 2016 Define Poisson’s ratio.
-
May 2007 What is Poisson\'s ratio?
-
-
Unit of strain is?Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Write the types of load.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Define the point of maximum bending moment.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Unit of Moment of Inertia?Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
May 2019 The unit of moment of inertia is _____.
-
May 2018
The unit of Moment of inertia is_____.
-
May 2009 The unit of moment of inertia is
-
-
Write the formula for sectional modulus.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Write the bending equation.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Write the bending equation.
-
May 2021 What is bending equation? Write down its importance.
-
May 2009 Write the bending equation and define the abbreviations used in it.
-
-
Define stiffness of beam.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Define stiffness of beam.
-
-
What is the equivalent length of column when both the ends of column are hinged?Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Write the Euler's formulaVery Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Unit of bending moment is?Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Define brittleness.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
Define modulus of elasticity.Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Define modulus of elasticity.
-
May 2006 Define moduli of elasticity and rigidity.
-
May 2005 Define the terms: Young’s modulus and modulus of rigidity.
-
-
Explain the Proportional Limit and Elastic Limit of the stress strain curve.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
State and explains the Hooke’s law.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
May 2021 State and explain Hooke’s law.
-
May 2019 State and explain Hooke’s Law.
-
May 2018
State and explain Hooke’s law.
-
May 2016 State & explain Hooke’s Law.
-
-
Explain the types of end supports of a beam.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
May 2020 Explain the various types of beams and types of loads on the beam.
-
May 2016 Define the various types of loads acting on beam.
-
May 2009 Define different types of support used in beams.
-
-
What is Shear Force and Bending Moment?Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Define shear force and bending moment.
-
May 2008 What is shear stress in a beam?
-
-
Define the Theorem of Perpendicular Axis and Theorem of Parallel Axis.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
May 2007 Define theorem of parallel axis.
-
Dec 2007 Define theorem of perpendicular axes.
-
May 2006 Define theorem of perpendicular axis.
-
-
Write the Assumptions made in the theory of Simple Bending.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Write down the assumptions made in the theory of simple bending.
-
May 2019 Write the assumptions made in theory of simple bending.
-
May 2015 Write down the assumptions made in Theory of Simple Bending.
-
-
Differentiate between short column and long column.Short Answer 5 Marks May-2022 • PSBTE DIPLOMA
-
Calculate the safety working load for a circular steel strut of 6 m length and having diameter 80 mm which is hinged at both ends. The factor of safety is 4. TAKE E= 210000 N/mm2.Long Answer 10 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Calculate the safe working load for a circular steel strut of 6 m length and having diameter 80 mm which is hinged at both ends. The factor of safety is 4. Take E = 2.1 × 10^5 N/mm^2.
-
-
Explain the stress strain diagram for Tensile Test conducted on metals.Long Answer 10 Marks May-2022 • PSBTE DIPLOMA
-
A cantilever beam 20 m long carries loads of 50kN, 20kN and 30kN at distances 5m, 15m and 20m respectively from the fixed end. Draw the S.F. and B.M. diagrams for the cantilever.Long Answer 10 Marks May-2022 • PSBTE DIPLOMA
-
Find the moment of inertia of T section having dimensions 100mm × 100mm × 10mm.Long Answer 10 Marks May-2022 • PSBTE DIPLOMA
-
May 2022 Calculate the moment of inertia for L-section of dimensions 100 mm × 80 mm × 20 mm along x-x axis and y-y axis passing through the C.G. of the section.
-
May 2020 Find the moment of inertia of T section having dimensions 100 × 100 × 10 mm about XX axis passing through the C.G. of the section.
-
May 2020 Find the moment of inertia of T section having dimensions 100 × 100 × 10 mm about YY axis passing through the C.G. of the section.
-
May 2019 Determine the moment of inertia of T section (100mm x 100mm x 20mm) about the horizontal and vertical axes, passing through the centre of gravity of the section.
-
May 2007 Calculate the second moment of area of a T-section 150 x 150 x 50 mm about horizontal and vertical axes passing through the centre of gravity of the section.
-
May 2006 Find the second moment of area of a L-section 100 x 80 x 20 mm about the horizontal and vertical axes passing through the centre of gravity of the section.
-
-
Following observations are obtained during a tensile test conducted on mild steel bar. Dia. Of steel bar = 4cm. Gauge length of bar =300 mm. Load at elastic Limit = 300kN. Extension at Elastic Limit = 0.045 cm. Maximum Load = 420kN. Total Extension = 7.5 cm. Dia of rod at Failure =3.4cm. Find the i) Young's Modulus of Elasticity, ii) Stress at Elastic Limit, iii) Percentage Elongation, iv) Percentage reduction in area.Long Answer 10 Marks May-2022 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Structural Mechanics previous year question papers for 4th semester civil diploma?
You can use this page to look for subject-wise Structural Mechanics question papers for the 4th semester Diploma in Civil Engineering under PSBTE.
02 Are PDF question papers available for SM?
This page is meant to help students find question paper PDF downloads for Structural Mechanics when available on the site.
03 How can these papers help with exam preparation?
Old papers help you revise faster, understand the usual exam format, and identify important and repeated topics in Structural Mechanics.
04 Is BRpaper the official website of Punjab State Board of Technical Education?
No. BRpaper is not the official website of PSBTE. It only helps students find previous year and subject-wise question papers.
05 Does this page include solved Structural Mechanics papers?
This page is focused on previous year question papers and practice material. Solved papers or answers are not guaranteed unless clearly shown on the page.