Solved question paper for RCCD May-2006 (DIPLOMA 5th)
Solved Question Paper
Elements of RCC design May-2006
PSBTE • DIPLOMA • Cvil Engineering • 5th • May-2006
RCCD is the Punjab State Board of Technical Education Diploma in Engineering Civil Engineering 5th semester subject page for Elements of RCC Design. Students can find subject-wise previous year question papers and old papers to revise key concepts, practice exam-style questions, and understand the paper pattern used in earlier exams. This can help in spotting repeated topics and preparing more confidently for the semester test. BRpaper is not the official website of the Punjab State Board of Technical Education or any board or institution. It only helps students search and access exam preparation material related to this subject.
Solved Questions
Solved-
In an under reinforced section, steel will attain its maximum permissible stress earlier.True / False May-2006 • PSBTE DIPLOMA
-
May 2006 In an under reinforced section, steel will attain its maximum permissible stress earlier.
-
-
A doubly reinforced section of beam is generally provided when the dimensions of the beam is not restricted.True / False May-2006 • PSBTE DIPLOMA
-
May 2007 A doubly reinforced section of beam is recommended where the dimensions of the beam are restricted.
-
May 2006 A doubly reinforced section of beam is generally provided when the dimensions of the beam is not restricted.
-
-
In a T-beam the thickness of flange is the overall thickness of the slab above the beam.True / False May-2006 • PSBTE DIPLOMA
-
May 2007 In a T-beam, thickness of flange is taken as the total thickness of _____.
-
May 2006 In a T-beam the thickness of flange is the overall thickness of the slab above the beam.
-
-
Two-way slab is recommended when ratio between its length and breadth is less than two.True / False May-2006 • PSBTE DIPLOMA
-
May 2007 Two-way slab is recommended when ratio between its length and breadth is more than two.
-
May 2006 Two-way slab is recommended when ratio between its length and breadth is less than two.
-
-
Actual length of a column is smaller than effective length.True / False May-2006 • PSBTE DIPLOMA
-
May 2006 Actual length of a column is smaller than effective length.
-
-
In pre-tensioning, the reinforcement is placed on the bed ______ the concrete is poured.Fill in the Blanks May-2006 • PSBTE DIPLOMA
-
May 2006 In pre-tensioning, the reinforcement is placed on the bed __________ the concrete is poured.
-
-
When the ratio of effective length to its least lateral dimension of a column is 20, the column is called ______.Fill in the Blanks May-2006 • PSBTE DIPLOMA
-
May 2006 When the ratio of effective length to its least lateral dimension of a column is 20, the column is called __________.
-
-
The unit of moment of resistance is ______.Fill in the Blanks May-2006 • PSBTE DIPLOMA
-
May 2006 The unit of moment of resistance is __________.
-
-
In R.C.C., coefficient of thermal expansion of steel should be ______ as that of concrete.Fill in the Blanks May-2006 • PSBTE DIPLOMA
-
May 2006 In R.C.C., coefficient of thermal expansion of steel should be __________ that of concrete.
-
-
The circular column having helical binders must have at least ______ bars of longitudinal reinforcement.Fill in the Blanks May-2006 • PSBTE DIPLOMA
-
May 2009 The circular column with helical reinforcement shall be reinforced with at least ______ number longitudinal bars.
-
May 2006 The circular column having helical binders must have at least __________ bars of longitudinal reinforcement.
-
Dec 2006 The circular column with helical reinforcement shall be reinforced with at least ______ number of bars.
-
-
Critical and actual neutral axis of a singly reinforced beam.Short Answer 5 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 Critical and actual neutral axis of a singly reinforced beam.
-
-
Freyssinet system of pre-stressing.Short Answer 5 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 Freyssinet system of pre-stressing.
-
-
Differentiate between long and short columns.Short Answer 5 Marks May-2006 • PSBTE DIPLOMA
-
May 2008 Give the comparison between long and short column.
-
May 2007 Differentiate between long and short columns.
-
May 2006 Give the comparison between long and short column.
-
May 2006 Differentiate between long and short columns.
-
Dec 2006 Give the comparison between long and short column.
-
-
Factors to be kept in view to achieve increased bond stress between steel and concrete.Short Answer 5 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 Factors to be kept in view to achieve increased bond stress between steel and concrete.
-
-
An R.C.C. beam of 700 mm overall depth and 300 mm width consists of 4 bars of 22 mm dia as tensile reinforcement. The effective cover at bottom is 50 mm. Calculate the moment of resistance when maximum stress in steel and concrete are 120 N/mm² and 8 N/mm² respectively.Long Answer 15 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 An R.C.C. beam of 700 mm overall depth and 300 mm width consists of 4 bars of 22 mm diameter as tensile reinforcement. The effective cover at bottom is 50 mm. Calculate the moment of resistance.
-
-
A square R.C.C. column of 300 mm side carries axial load of 44 × 10^? N. The area of steel reinforcement provided being 1257 mm² longitudinally. Find the induced stresses in concrete and steel. Take m = 18.Long Answer 15 Marks May-2006 • PSBTE DIPLOMA
-
A doubly reinforced R.C.C. beam 250 mm wide and 400 mm deep overall is reinforced with 968 sq.mm steel on tension side and 488 sq.mm on compression side each at an effective cover of 50 mm. If permissible stresses in steel and concrete are 140 N/mm² and 7 N/mm² respectively, calculate moment of resistance.Long Answer 15 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 A doubly reinforced R.C.C. beam 250 mm wide and 400 mm deep overall is reinforced with 968 sq. mm steel on tension side and 488 sq. mm on compression side, each at an effective cover of 50 mm. If permissible stresses in steel and concrete are 140 N/mm² and 7 N/mm² respectively, calculate moment of resistance.
-
-
Flange thickness and width of an isolated T-beam are 100 mm and 1600 mm respectively. Its web is 250 mm and effective depth up to the centre of the tensile reinforcement is 600 mm. The tensile reinforcement consists of 4-20 mm dia. bars. The beam is simply supported over a span of 7 m. Calculate the stresses developed in steel and concrete if the beam is subjected to a moment of 1450 kN m. Take m = 19.Long Answer 15 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 Flange thickness and width of an isolated T-beam are 100 mm and 1600 mm respectively. Its web is 250 mm and effective depth up to the centre of the tensile reinforcement is 600 mm. The tensile reinforcement consists of 4-20 mm dia. bars. The beam is simply supported over a span of 7 m. Calculate the stresses developed in steel and concrete if the beam is subjected to a moment of resistance of 450 kN·m. Take m = 19.
-
-
Design a floor slab simply supported over an effective span of 3.1 m. Total load including self weight and superimposed load is 7100 N/m². Adopt M15 grade of concrete and mild steel reinforcement and assume stresses in steel and concrete and m accordingly. Apply no check.Long Answer 15 Marks May-2006 • PSBTE DIPLOMA
-
May 2006 Design a floor slab simply supported over an effective span of 3.1 m. Total load including self weight and superimposed load is 7100 N/m². Adopt M15 grade of concrete and mild steel reinforcement and assume stresses in steel and concrete and \'m\' accordingly. Apply no check.
-
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 What is RCCD in Diploma Civil Engineering?
RCCD stands for Elements of RCC Design, a 5th semester subject in Diploma in Engineering Civil Engineering under PSBTE.
02 Can I find subject-wise previous year papers for RCCD here?
Yes, this page is meant to help students look for RCCD subject-wise previous year question papers and old papers.
03 How do RCCD old papers help in exam preparation?
They help students understand the question style, revise important topics, and notice repeated areas from earlier exams.
04 Are these RCCD papers official PSBTE documents?
No. BRpaper is not the official website of PSBTE or any board. It only provides exam preparation and paper-finding support.
05 Are solved papers available for RCCD?
This page is focused on previous year and old question papers. If solved or answer-based material is available, it depends on the listed content on the site.