Solved question paper for RCCD May-2009 (DIPLOMA 5th)

Home
psbte
diploma
civil
5th
rccd
May-2009

Solved Question Paper

Elements of RCC design May-2009

PSBTE • DIPLOMA • Cvil Engineering • 5th • May-2009

RCCD is the Punjab State Board of Technical Education Diploma in Engineering Civil Engineering 5th semester subject page for Elements of RCC Design. Students can find subject-wise previous year question papers and old papers to revise key concepts, practice exam-style questions, and understand the paper pattern used in earlier exams. This can help in spotting repeated topics and preparing more confidently for the semester test. BRpaper is not the official website of the Punjab State Board of Technical Education or any board or institution. It only helps students search and access exam preparation material related to this subject.

Question papers (year-wise) Solutions

Solved Questions

Solved

Steel used in RCC is MILD STEEL.

True / False 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Foundations of R.C.C. columns can be laid in brick masonry.

True / False 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2009 Brick masonry is used in R.C.C. column bases.
The major loss of pre-stress is caused due to creep.

True / False 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The cube strength of concrete used for pre-stressed member should not be less than 350 Kg/cm².

True / False 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

The clear cover in a simply supported slab should not be less than the diameter of the reinforcing bar.

True / False 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The distribution reinforcement is also called as reinforcement.

Fill in the Blanks 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The pitch of bars of main reinforcement in solid slabs should not exceed the effective depth of slab.

Fill in the Blanks 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Under normal loading conditions, the tensile stresses set up in concrete will be than permissible stresses.

Fill in the Blanks 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

A twisted bar has % more yield stress than ordinary mild steel bar.

Fill in the Blanks 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2009 A twisted bar has about ____ more yield strength than ordinary m.s. bar. (20%, 50%)
In singly reinforced beams, steel reinforcement is provided zone.

Fill in the Blanks 1 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2009 Steel reinforcement is provided in tensile zone in case of singly reinforced beams.
What is the meaning of balanced section and economical section?

Short Answer 3 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
How the spacing of bars is worked out in slabs?

Short Answer 3 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Give IS specifications for lateral reinforcement in RCC columns.

Short Answer 3 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2009 Explain the I.S. specification for providing longitudinal reinforcement in R.C.C. column.
Write short note on post tensioning and pre-tensioning.

Short Answer 3 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2010 Write short note on post tensioning.

May 2010 Write short note on pre-tensioning.
Give the comparison between limit state method and working stress method.

Short Answer 3 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2008 Give the comparison of limit state method and working stress method of design.

May 2006 Give the comparison of limit state method and working stress method of design.

Dec 2006 Give the comparison of limit state method and working stress method of design.
Determine the dimensions of a singly reinforced R.C.C. beam subjected to B.M. of 250 kNm. Take stresses in concrete and steel as 5 N/mm² and 140 N/mm² respectively. Take m = 18, beam width = 0.750f depth.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2005 A R.C.C. beam 250 mm wide and 600 mm deep up to the centre of tensile steel, is subjected to maximum B.M. of 14 × 10^7 Nmm. The reinforcement consists of 4 numbers of 25 mm dia bars, take m = 11. Determine the stresses in concrete and steel.

Find the safe load which a short column 300 × 300 mm in section reinforced with 8 bars of 20 mm dia in M.S concrete mix. Permissible stresses in concrete and steel are 4 N/mm² and 130 N/mm² respectively.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2008 A column 400 mm × 400 mm × 8 mm long is reinforced with 4-22 mm diameter bars. Find the safe load the column can carry if it is restrained at the ends. The stresses in concrete and steel are 5 N/mm² and 190 N/mm² respectively.

May 2007 A short column 350 x 350 mm in section is reinforced with eight bars of 25 mm dia. Find the safe load on the column as per I.S. code. Permissible stresses in concrete and steel are 4 N/mm² and 130 N/mm² respectively.
Design a verandah slab for an effective span of 2.5 m loaded with a superimposed load of 3000 N/m². Use M__ concrete mix. Assume required data and permissible stresses as per IS code 456-2000.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Draw the sectional plan and elevation of a 450 × 450 mm sq. column from the following data: Longitudinal bars = 6 Nos. 20 mm dia; Transverse ties = 8 mm 6 @ 300 mm c/c; Base reinforcement = 12 mm 4 bars @ 150 mm c/c both ways; Footing = 1.2 m × 1.2 m; Thickness of footing at free end = 150 mm; Thickness of footing at column face = 250 mm; Concrete cover = 25 mm; Depth below GL = 1.2 m PTO.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 Draw sectional plan and sectional elevation of a square column with an isolated footing of uniform thickness from the following data: Size of column: 450 mm × 450 mm; Depth below G.L.: 1.2 m; Plinth level: 300 mm above G.L.; Height of ceiling above plinth level: 3.5 m; Reinforcement details of column: main bars 4 - 25 mm dia, lateral ties 8 mm dia @ 300 mm c/c; Reinforcement details of footing: size of footing 2.2 m × 2.2 m, thickness of footing 300 mm, reinforcement 12 mm dia bars @ 150 mm c/c both ways. The main bars of the column are tied with the steel of 130 mm thick RCC slab. Also prepare bar bending schedule.

May 2016 Draw to suitable scale sectional plan and sectional elevation of a square column with an isolated footing of uniform thickness from the following data: Size of column = 400x400mm; Depth below GL = 1.5m; Plinth level = 450mm above GL; Height of ceiling above plinth level = 3.2m; Column reinforcement: main bars = 4-25mm dia.; Lateral ties = 10mm dia. @250mm c/c; Size of footing = 2.5x2.5m; Thickness of footing = 400mm; Reinforcement in footing = 12mm dia. @ 250mm c/c both ways; Main bars of column are going into 120mm thick slab.

Dec 2009 Draw the sectional plan and elevation of a square column from the following data: Longitudinal bars = 4 nos 25 mm; Transverse ties = 6 mm 250 c/c; Base reinforcement = 10 mm bars @ 150 mm c/c both ways; Footing = 1.2 m x 1.2 m. Assume thickness of footings at end and column face. Depth of footing below G.L. = 1.5 m.
Draw the cross-section of a dog-legged stair case for a single storeyed building from the following data: Height between floors = 3.0 m; Space available = 4.3 m; Slab thickness = 100 mm; Tread width = 250 mm; Rise = 200 mm; Landing width = 1.0 mm; Main bars = 12 mm dia @ 120 mm c/c with alternate bent up bars; Distribution steel = 8 mm dia @ 150 mm c.c. Assume any other data as per requirement.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Draw the x-sections one near support other near the free end along with L-section of a cantilever beam which is projecting 3 m beyond support having sizes 300 × 600 mm and 300 × 150 mm at fixed end and free end respectively. Reinforcement: 4-bars 25 mm dia, stirrups are 2-legged, 8 mm dia. Use suitable scale. Assume any other data.

Long Answer 25 Marks May-2009 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Explore all data

FAQ

Frequently Asked Questions

Answers about this subject, solved papers, and preparation.

Updated regularly

01 What is RCCD in Diploma Civil Engineering?

RCCD stands for Elements of RCC Design, a 5th semester subject in Diploma in Engineering Civil Engineering under PSBTE.

02 Can I find subject-wise previous year papers for RCCD here?

Yes, this page is meant to help students look for RCCD subject-wise previous year question papers and old papers.

03 How do RCCD old papers help in exam preparation?

They help students understand the question style, revise important topics, and notice repeated areas from earlier exams.

04 Are these RCCD papers official PSBTE documents?

No. BRpaper is not the official website of PSBTE or any board. It only provides exam preparation and paper-finding support.

05 Are solved papers available for RCCD?

This page is focused on previous year and old question papers. If solved or answer-based material is available, it depends on the listed content on the site.

Solved question paper for RCCD May-2009 (DIPLOMA 5th)

Elements of RCC design May-2009

Solved Questions

Explore all data

PTU

PU Chandigarh

PSBTE

PSEB(School)

BFUHS

PU-PATIALA

GNDU

HPTSB

GTU

MDU

MRSPTU

CBSE(School)

BSEH

UBSE

PTU DISTANCE EDUCATION

Frequently Asked Questions