Solved question paper for RCCD May-2010 (DIPLOMA 5th)
Solved Question Paper
Elements of RCC design May-2010
PSBTE • DIPLOMA • Cvil Engineering • 5th • May-2010
RCCD is the Punjab State Board of Technical Education Diploma in Engineering Civil Engineering 5th semester subject page for Elements of RCC Design. Students can find subject-wise previous year question papers and old papers to revise key concepts, practice exam-style questions, and understand the paper pattern used in earlier exams. This can help in spotting repeated topics and preparing more confidently for the semester test. BRpaper is not the official website of the Punjab State Board of Technical Education or any board or institution. It only helps students search and access exam preparation material related to this subject.
Solved Questions
Solved-
State True or False: Resisting moment factor (Q) is constant for given values of stress and modular ratio.True / False 1 Marks May-2010 • PSBTE DIPLOMA
-
State True or False: Flexural shear failure cracks are normally at 45° with the horizontal.True / False 1 Marks May-2010 • PSBTE DIPLOMA
-
State True or False: Maximum reinforcement in a beam is 0.046D.True / False 1 Marks May-2010 • PSBTE DIPLOMA
-
State True or False: Transverse reinforcement does not contribute to the strength of a column.True / False 1 Marks May-2010 • PSBTE DIPLOMA
-
State True or False: Mild steel wires are used in prestressing a concrete member.True / False 1 Marks May-2010 • PSBTE DIPLOMA
-
Fill in the blank: Conical plug used in Freyssinet system is called ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Fill in the blank: The minimum diameter of the longitudinal bars shall not be less than ______ mm.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2008 The diameter of a longitudinal bar in column should never be less than _______.
-
-
Fill in the blank: The formula for calculating nominal shear stress in beams or slabs of uniform depth is ______.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
May 2016 The formula for calculating nominal shear stress in beams or slabs of uniform depth is ______.
-
-
Fill in the blank: Effective cover is taken upto ______ reinforcement.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
May 2009 Effective cover is taken upto ______ reinforcement.
-
-
Fill in the blank: The load due to snow is ______ load.Fill in the Blanks 1 Marks May-2010 • PSBTE DIPLOMA
-
What is the purpose of providing shear reinforcement in beams?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2016 What is the necessity of providing shear reinforcement? And explain various types of shear reinforcement used.
-
May 2009 What are the various types of shear reinforcement used? Explain briefly.
-
Dec 2009 What is the purpose of providing shear reinforcement in beams?
-
May 2008 What is the necessity of providing shear reinforcement? Differentiate between twisted bars and plain bars.
-
May 2007 When shear reinforcement is provided in RCC beams and what are the common methods of providing shear reinforcement.
-
Dec 2001 Why is shear reinforcement provided? Give different arrangements used.
-
-
What is minimum eccentricity of column?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2016 What do you understand by effective length of column and minimum eccentricity?
-
May 2008 What is minimum eccentricity of column?
-
May 2006 What is minimum eccentricity of column?
-
-
What are the advantages of RCC?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
What are the limitations of RCC?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
State the conditions under which doubly reinforced beams are provided.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
Dec 2016 Write down the conditions under which doubly reinforced beams are provided.
-
Dec 2006 State the conditions under which doubly reinforced beams are provided.
-
-
What are the essential properties which a reinforcing material should possess?Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2007 What are the essential properties, which a reinforcing material should possess?
-
-
Write short note on post tensioning.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Write short note on pre-tensioning.
-
May 2009 Write short note on post tensioning and pre-tensioning.
-
-
Write short note on pre-tensioning.Short Answer 3 Marks May-2010 • PSBTE DIPLOMA
-
May 2010 Write short note on post tensioning.
-
May 2009 Write short note on post tensioning and pre-tensioning.
-
-
An R.C.C. beam 300 mm x 600 mm effective has to resist a bending moment of 135 kNm at a particular section. Reinforcement on tension side consists of five 20 mm bars and that on compression side three 20 mm bars. Find the stresses in steel and concrete. Take m = 13.33 and d = 40 mm.Long Answer 25 Marks May-2010 • PSBTE DIPLOMA
-
May 2008 An R.C.C. beam 400 mm x 600 mm (effective) is reinforced with 4 bars of 32 mm dia bottom. Effective cover is 40 mm. The beam is subjected to a bending moment of 191 kN m. Find the stresses developed in steel and concrete. Take m = 13.33.
-
May 2006 An R.C.C. beam 400 mm x 600 mm (effective) is reinforced with 4 bars of 32 mm dia at bottom effective cover is 40 mm. The beam is subjected to a bending moment of 191 kN·m. Find the stresses developed in steel and concrete. Take m = 13.33.
-
-
What is prestressed concrete?Long Answer May-2010 • PSBTE DIPLOMA
-
Dec 2009 What is pre-stressed concrete? Give its importance in modern construction.
-
May 2008 What is pre-stressed concrete? What is its principle? What are the materials used in pre-stressing?
-
Dec 2006 What is pre-stressed concrete? Explain the different methods commonly adopted for pre-stressing.
-
May 2001 What is pre-stressed concrete? Give its brief introduction.
-
May 1998 What do you understand by Prestressed concrete? Explain its comment.
-
-
What is the principle of prestressing?Long Answer May-2010 • PSBTE DIPLOMA
-
State the advantages and disadvantages of prestressed concrete.Long Answer May-2010 • PSBTE DIPLOMA
-
May 2009 Give the advantages of pre-stressed concrete.
-
Dec 2008 Write the principle and advantages of pre-stressed concrete.
-
-
Discuss the methods of pre-stressing concrete.Long Answer May-2010 • PSBTE DIPLOMA
-
May 2008 Discuss the characteristics of reinforcing materials in cement concrete.
-
Dec 2008 Discuss the methods of pre-stressing concrete.
-
Dec 2001 Discuss the materials used in pre-stressed concrete.
-
-
Determine the maximum superimposed distributed load which the beam section 220 mm x 440 mm (effective cover = 40 mm) reinforced with total area of tension steel 1256.64 mm² can carry if the effective span is 5 m. Use M20 concrete and Fe 415 steel. Take m = 13.33.Long Answer 25 Marks May-2010 • PSBTE DIPLOMA
-
Draw the L-section, a cross-section near the support and a cross-section in the center of span of a rectangular R.C.C. simply supported beam with the given data.Long Answer 25 Marks May-2010 • PSBTE DIPLOMA
-
Draw the cross-section and sectional plan of a circular column of diameter 50 cm along with its footing from the given data.Long Answer 25 Marks May-2010 • PSBTE DIPLOMA
-
Draw the cross-section of a two way slab of a room 4.00 m x 5.00 m from the given data.Long Answer 25 Marks May-2010 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 What is RCCD in Diploma Civil Engineering?
RCCD stands for Elements of RCC Design, a 5th semester subject in Diploma in Engineering Civil Engineering under PSBTE.
02 Can I find subject-wise previous year papers for RCCD here?
Yes, this page is meant to help students look for RCCD subject-wise previous year question papers and old papers.
03 How do RCCD old papers help in exam preparation?
They help students understand the question style, revise important topics, and notice repeated areas from earlier exams.
04 Are these RCCD papers official PSBTE documents?
No. BRpaper is not the official website of PSBTE or any board. It only provides exam preparation and paper-finding support.
05 Are solved papers available for RCCD?
This page is focused on previous year and old question papers. If solved or answer-based material is available, it depends on the listed content on the site.