Solved question paper for RCD Dec-2019 (DIPLOMA 5th)

Home
psbte
diploma
civil
5th
rcd
Dec-2019

Solved Question Paper

Reinforced concrete design Dec-2019

PSBTE • DIPLOMA • Cvil Engineering • 5th • Dec-2019

RCD is the subject page for Punjab State Board of Technical Education Diploma in Engineering students of Civil Engineering, 5th semester. Here you can look for subject-wise previous year question papers for Reinforced Concrete Design to support revision, practice, and a better understanding of the exam pattern, repeated questions, and marking style. These old papers help students focus on important topics and prepare more confidently for semester exams. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find previous year papers and exam preparation material for this subject in one place.

Question papers (year-wise) Solutions

Solved Questions

Solved

RCC stands for ____.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Concrete is the basis of ____.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Working stress method is based on the linear ____.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The ____ method is referred to as deterministic.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

The ____ of concrete increases with the increase in grade of concrete.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The ____ of a concrete member increases with percentage of tensile reinforcement.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The ____ of the slab forms the flange of a T-beam.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The beam below the slab is called ____.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Prestressed concrete member is ____ than RC member.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The ____ varies with time.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Steel is strong in tension as well as in compression.

True / False 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Limit state method is also known as modular method.

True / False 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

____ confine the concrete and increase shear resistance.

Fill in the Blanks 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Neutral axis passes through the flange of a T-beam.

True / False 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
High tensile steel is used in prestressed concrete.

True / False 1 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
What is meant by under reinforced and over reinforced beam section?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Discuss stress diagrams for a reinforced section of a beam.

Long Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
What assumptions are made in limit state of collapse (flexure)?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018
What are the assumptions made in Limit state of collapse in flexure?

May 2017
Write down the assumptions made in limit state of collapse in flexure.

May 2015 What are the assumptions in Limit State of Collapse in Flexure?

May 2015 What are the assumptions in Limit State of Collapse in Flexure?

Dec 2015 Write down assumptions in limit state of collapse in flexure.

Dec 2015 Write down assumptions in limit state of collapse in flexure.
Define partial safety factor for materials and partial safety factor for loads.

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Define neutral axis and maximum depth of neutral axis.

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Under what circumstances are doubly reinforced beams provided?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 When and why doubly reinforced beams are preferred than singly reinforced beams?

May 2019 Why/when doubly reinforced beams are preferred than singly reinforced beams?

Dec 2018
Why doubly reinforced beams are preferred over singly reinforced beams?

May 2017
Why doubly reinforced beams are preferred over singly reinforced beams?
Why is reinforcement provided in a one-way slab?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Why is a two-way slab more economical as compared to a one-way slab?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
How does the effective length of a column depend on its end conditions?

Short Answer 5 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

A simply reinforced beam of size 250 × 500 mm (effective) is reinforced with 3 bars of 20 mm diameter. Find the capacity and specify the type of beam. Use M20 grade concrete and Fe 415 steel. Also find the neutral axis if the reinforcement is increased to 5 bars of 20 mm.

Long Answer 10 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Design a square R.C.C. column to carry an axial ultimate load of 600 kN. One side of the column is 200 mm. Take permissible compressive strength in steel and concrete as 415 N/mm² and 20 N/mm² respectively.

Long Answer 10 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
A rectangular beam section is 250 mm wide and 450 mm deep to the centre of the tension steel. It is reinforced with 2 bars of 16 mm diameter as compression reinforcement at the top and 4 bars of 25 mm diameter as tensile steel. Using M20 grade of concrete and Fe 415 steel, calculate the ultimate moment of resistance of the beam section.

Long Answer 10 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 A doubly reinforced beam section is 300 mm x 500 mm overall. It is provided with 2-12 mm diameter as compression steel and 4-25 mm diameter as tensile steel. These reinforcements are provided at an effective cover of 40mm. determine the ultimate moment of resistance of beam section. Use M20 concrete and Fe 415 steel.

May 2022 Calculate ultimate moment of resistance for a beam of size 270 x 570 mm. tensile reinforcement is 4-20 mm dia. Effective cover to tension is 20 mm. Use M 20 grades of concrete and Fe 415 steel.

May 2020 Calculate the ultimate moment of resistance for a beam of size (270X570) mm. Tension reinforcement is 4-20 mm dia. Effective cover to tension is 20 mm. Use M20 grade of concrete and Fe415 grade of steel.

Dec 2018
Calculate ultimate moment of resistance for a beam of size 270 x 570 mm. Tension reinforcement is 4- 20mm dia. Effective cover to tension is 20 mm. Use M20 grades of concrete and Fe 415 steel.

May 2016 A doubly reinforced beam section is 250x 450mm overall. 2-10 mm diameter as compression steel and 4-20 mm diamete r as tensile steel. This reinforcement is provided at an effective cover of 40mm. Determine the ultimate moment of resistance of the beam section. Use M20 concrete and Fe 415 steel.

Dec 2016 Calculate the ultimate moment of resistance for a beam of size (270X570) mm. Tension reinforcement is 4-20 mm dia. Effective cover to tension is 20 mm. Use M20 grade of concrete and Fe415 grade of steel.

Dec 2015 Calculate the ultimate moment of resistance for a beam of size 250mm×550mm (overall). Tension reinforcement is 4-20 mm Φ. Assume M20 grade of concrete and Fe-250 steel. Effective cover to tension reinforcement is 20mm.

Dec 2015 Calculate the ultimate moment of resistance for a beam of size 250mm×550mm (overall). Tension reinforcement is 4-20 mm Φ. Assume M20 grade of concrete and Fe-250 steel. Effective cover to tension reinforcement is 20mm.
Write the steps for one-way R.C.C. slabs.

Short Answer 10 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

What is pre-stressed concrete?

Short Answer 10 Marks Dec-2019 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018
Define pre-stressed concrete and its types

Explore all data

FAQ

Frequently Asked Questions

Answers about this subject, solved papers, and preparation.

Updated regularly

01 Where can I find RCD previous year question papers for Civil Engineering 5th semester?

This page is meant for finding subject-wise previous year question papers for RCD under PSBTE Diploma in Engineering Civil Engineering, 5th semester.

02 Does this page help with revision for Reinforced Concrete Design?

Yes, old RCD papers help students revise important topics, practice exam-style questions, and understand how questions are usually asked.

03 Are these papers useful for understanding the exam pattern?

Yes, previous year papers are helpful for spotting repeated questions, common units, and the general marking style used in semester exams.

04 Is BRpaper the official website of Punjab State Board of Technical Education?

No, BRpaper is not the official website of Punjab State Board of Technical Education. It only provides paper-finding and exam-preparation support.

05 Can I search by subject instead of only by full course?

Yes, this page is organized for subject-wise browsing so civil engineering students can look for RCD papers directly.

Solved question paper for RCD Dec-2019 (DIPLOMA 5th)

Reinforced concrete design Dec-2019

Solved Questions

Explore all data

PTU

PU Chandigarh

PSBTE

PSEB(School)

BFUHS

PU-PATIALA

GNDU

HPTSB

GTU

MDU

MRSPTU

CBSE(School)

BSEH

UBSE

PTU DISTANCE EDUCATION

Frequently Asked Questions