Solved question paper for SSDR May-2016 (DIPLOMA 6th)
Solved Question Paper
Steel structures design and drawing May-2016
PSBTE • DIPLOMA • Cvil Engineering • 6th • May-2016
SSDR for Punjab State Board of Technical Education in Diploma in Engineering, Civil Engineering, 6th Semester helps students find subject-wise previous year question papers and old papers for exam preparation. This page is useful for revision, understanding the exam pattern, and seeing how questions are framed in Steel Structures Design and Drawing. It is intended to support year-wise and semester-wise paper search for students looking for practice before exams. BRpaper is not the official website of the university or board, and the papers here should be used as study support for preparation and revision.
Solved Questions
Solved-
BIS Code for the design of steel structures is __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
The size of rivet is specify by diameter of __________ of the rivet.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
Dec 2016 The size of rivet can be determined by the formula _______.
-
Dec 2015 Diameter of rivet is determined from formula
-
May 2010 Diameter of rivet is determined from formula as ____.
-
May 2008 Size of the rivet is determined from the formula ______.
-
-
If the nominal diameter of the rivet is 25 mm, its gross diameter = __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
Dec 2018 Gross diameter of the rivet is the diameter of the ______.
-
Dec 2016 If the nominal dia. of the rivet is 25mm then what is the gross dia._________.
-
May 2015 Fill in the blank: Gross diameter of the rivet is the diameter of the __________.
-
-
The minimum pitch of the rivet is given by __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
The size of the fillet weld is specified by __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
Maximum size of fillet weld for connecting to plates of 10 mm thickness each is __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
May 2022 Maximum size of fillet weld for 10mm plate is _________.
-
Dec 2016 The max. size of the fillet weld for 10mm plate is _________ mm.
-
-
The permissible stress in axial tension for tension members is equal to __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
The permissible stresses in field driven rivets are __________ percent less than those for shop driven rivets.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
Slenderness ratio for a column is given by the ratio of effective length and __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
The permissible deflection in case of a simply supported laterally restrained beam of effective span L is given by __________.Fill in the Blanks 1.5 Marks May-2016 • PSBTE DIPLOMA
-
What are the assumptions in the theory of riveted connections?Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
May 2010 State the assumptions in the theory of riveted joints.
-
Dec 2009 State the assumptions in the theory of riveted joint.
-
Dec 2008 State the assumptions in the theory of riveted joints.
-
-
What are the merits of a welded joint over riveted joints?Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
Dec 2016 What are advantages of welded joint over riveted joints?
-
May 2015 Give disadvantages of welded joints when compared to riveted joints.
-
-
How will you calculate the net affected area of a tension member using two angles placed back to back and connected on same side of the gusset plate?Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
Define the difference between net affective area and gross area and where each one of them is used.Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
Define effective length, radius of gyration and slenderness ratio.Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
May 2022 Define Radius of Gyration and Slenderness ratio.
-
May 2018 Define i) Radius of gyration ii) slenderness ratio iii) effective length
-
Dec 2015 Explain the terms slenderness ratio and radius of gyration.
-
-
Write a short note on laterally restrained beams.Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
May 2022 Write short note on laterally restrained beams.
-
May 2022 What are laterally supported beams?
-
May 2019 What are laterally restrained beams? Explain with sketches.
-
Dec 2015 What are laterally restrained beams?
-
May 2009 Define laterally restrained beams.
-
Dec 2009 What is laterally restrained beam?
-
Dec 2008 What are laterally restrained beams?
-
-
What is a plate girder? When they are used?Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
Dec 2015 What is a plate girder? What are its various components? Explain with sketch.
-
-
Define pitch, edge distance and gross diameter of rivet.Short Answer 5 Marks May-2016 • PSBTE DIPLOMA
-
Design a riveted connection to connect 2 plates of 10 mm and 12 mm thickness using IS 800 specifications.Long Answer May-2016 • PSBTE DIPLOMA
-
Design a fillet welded joint to connect 2 plates of 200 mm x 10 mm and 180 mm x 8 mm. Take permissible stresses in axial tension and shear as 150 and 110 N/mm2 respectively.Long Answer May-2016 • PSBTE DIPLOMA
-
May 2008 Design a fillet welded lap joint for two plates of sizes 100 mm × 15 mm and 100 mm × 10 mm. Take permissible tensile stress = 150 MPa and shear stress in weld as 108 MPa.
-
Dec 2008 Design a suitable fillet welded joint between two plates of sizes 220 mm x 10 mm and 200 mm x 10 mm. Permissible tensile stress in plate is 150 MPa. Take shear stress in weld as 108 MPa.
-
-
Design a tension member to carry an axial load of 1000 kN. Also design the end connection.Long Answer May-2016 • PSBTE DIPLOMA
-
A discontinues angles strut consist of two ISA 90 x 60 x 8 placed back to back and connected on both sides of 10 mm thick gusset plate by using a fillet weld. Calculate its load carrying capacity.Long Answer 15 Marks May-2016 • PSBTE DIPLOMA
-
May 2017 Calculate the safe load carrying capacity of a discontinuous double angle strut made up of 2 -ISA100X75X6 mm. placed back to back on the same side of a gusset plate 8mm thick by one rivet at ends. Center to center length of strut is 2.15m.
-
Dec 2017 A discontinuous strut having effective length 2m consist of two equal angles ISA 50x50x6 mm it is connected to the opposite sides of gusset plates by two rivets on each angle at two ends. Calculate the load carrying capacity of the strut.
-
-
Design a laterally restrained beam simply supported over a clear span of 4 meters and carrying a super imposed load of 25 kN per meter throughout its span. The permissible stress in bending compression is 165 N/mm2 and shear is 100 N/mm2.Long Answer 15 Marks May-2016 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SSDR previous year question papers?
This page is meant to help students खोज subject-wise SSDR previous year question papers for PSBTE Diploma Civil Engineering 6th semester.
02 Is SSDR the same as Steel Structures Design and Drawing?
Yes, SSDR refers to Steel Structures Design and Drawing for Civil Engineering 6th semester.
03 Can I use old SSDR papers for revision?
Yes, old SSDR papers are useful for revision, practice, and understanding the question pattern used in exams.
04 Are these official PSBTE question papers?
No. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find study material and previous year papers.
05 Do you provide solved SSDR papers?
This page is focused on previous year and old question papers. Solved papers may not be available for every year.