Solved question paper for SSDR May-2018 (DIPLOMA 6th)
Solved Question Paper
Steel structures design and drawing May-2018
PSBTE • DIPLOMA • Cvil Engineering • 6th • May-2018
SSDR for Punjab State Board of Technical Education in Diploma in Engineering, Civil Engineering, 6th Semester helps students find subject-wise previous year question papers and old papers for exam preparation. This page is useful for revision, understanding the exam pattern, and seeing how questions are framed in Steel Structures Design and Drawing. It is intended to support year-wise and semester-wise paper search for students looking for practice before exams. BRpaper is not the official website of the university or board, and the papers here should be used as study support for preparation and revision.
Solved Questions
Solved-
ISSQ means ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
ISLC stands for ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
Rivets in double cover butt joints are in ____________ shear.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
Dec 2018 Rivets in double cover butt joint are in ______ shear.
-
Dec 2017 Rivets in single cover butt joint are in ………………..shear.
-
May 2010 Rivets in double cover butt joint are in ____ shear.
-
-
Lap, Tee or corner joints required ____________ weld.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2017 Lap, tee, or corner joints require type welds.
-
May 2008 Lap, tee or corner joints require ______ weld.
-
-
Members subjected to direct tension are called ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2009 Members subjected to direct tension are called _____.
-
Dec 2008 A member subjected to direct tension is known as ________.
-
-
In compression members ____________ area of section is used.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
A truss is usually loaded at the ____________ of its member.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 A truss is usually loaded at the __________ of its members.
-
Dec 2018 A truss is usually loaded at the _____ of its members.
-
-
Bending stress at the neutral axis is ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 Bending stress at neutral axis is _________.
-
May 2019 Zero bending stress occurs at __________ of beam.
-
May 2010 Bending stress at the neutral axis is ____.
-
Dec 2007 In a beam, bending stress at the neutral axis is ____.
-
-
The strength of beam depends upon ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2017 Strength of beam depends upon
-
-
Long columns fail due to ____________.Fill in the Blanks 1 Marks May-2018 • PSBTE DIPLOMA
-
Riveted butt joints have no cover plates.True / False 1 Marks May-2018 • PSBTE DIPLOMA
-
Welding requires skilled labour.True / False 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 The welding requires _________ labour.
-
-
In tension members, strength depends upon the gross area.True / False 1 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 In tension member strength depends upon gross area of section.
-
-
Compression member of a crane is called boom.True / False 1 Marks May-2018 • PSBTE DIPLOMA
-
In design of beams clear span is used for calculations.True / False 1 Marks May-2018 • PSBTE DIPLOMA
-
What are the type of failures occur in riveted joint?Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
Dec 2017 What do you understand by failure of riveted joint? Enlist various manners through which riveted joint can fail.
-
-
Explain the advantages and disadvantages of welded joint.Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 Write disadvantages of welded joints.
-
May 2019 What are disadvantages of welding?
-
May 2017 Explain the advantages and disadvantages of welding.
-
-
What do you mean by structural steel? Explain its properties.Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 What is fabrication of steel structures?
-
Dec 2018 Important considerations in fabrication and erecting of steel structures.
-
May 2017 Explain the purposes of structural steel used in engineering structures.
-
May 2017 Explain the important considerations in fabrication and erection of steel structures.
-
-
What are the different cases by which we can find the net area of the tension members?Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
Define i) Radius of gyration ii) slenderness ratio iii) effective lengthShort Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 Define Radius of Gyration and Slenderness ratio.
-
May 2016 Define effective length, radius of gyration and slenderness ratio.
-
Dec 2015 Explain the terms slenderness ratio and radius of gyration.
-
-
Draw a neat sketch showing various parts of roof truss.Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 Draw a neat sketch showing various parts of roof truss.
-
-
Differentiate between long and short columns.Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
What are the assumptions made with theory of simple bending?Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
May 2017 Explain the assumptions made in the theory of simple bending
-
May 2015 Write the assumptions in the theory of simple bending in case of flexural members.
-
-
Write a short note on precautions to be taken for the erection of steel structures.Short Answer 5 Marks May-2018 • PSBTE DIPLOMA
-
A double riveted cover butt joint is used for connecting two plates of 12 mm thickness. The diameter of the rivets is 22 mm. Calculate the necessary pitch and efficiency of the joint. Use PDSR. (τvf=100 N/mm2, σpf=300N/mm2.)Long Answer 10 Marks May-2018 • PSBTE DIPLOMA
-
Dec 2007 Calculate the pitch of 20 mm diameter rivets, when these are riveted to join two plates of 12 mm thickness by means of double riveted double cover plate butt joint. Provided f = 150 N/mm², f_s = 94.5 N/mm² and 12 N/mm².
-
-
SA 75 X 50 X 10 mm is to be connected to a gusset plate by 6 mm fillet weld. The load to be transmitted is 160 kN. Design the weld. Take τvf=102.5 N/mm2.Long Answer 10 Marks May-2018 • PSBTE DIPLOMA
-
Design the double angle member if the angles are placed back to back with their longer legs connected on the same side of the gusset plate. The tension member is subjected to a pull of 210 kN. Use 16mm PDSR, τvf=100 N/mm2, σpf=300N/mm2, σat=150 N/mm2.Long Answer 10 Marks May-2018 • PSBTE DIPLOMA
-
A simply supported beam carries a superimposed load of 3 kN/m on a clear span of 6.5 m. Design the beam section if the beam is laterally supported along its span.Long Answer 10 Marks May-2018 • PSBTE DIPLOMA
-
May 2022 A simply supported beam carries a superimposed load of 3 kN/m on a clear span of 6.5 m. Design the beam section if the beam is laterally supported along its span.
-
-
A single strut ISA 65 X 65 X 8 mm of a roof truss is 1.36m long. It is connected by one rivet at each end. Calculate the safe load the strut can carry. Refer steel table for stresses etc.Long Answer 10 Marks May-2018 • PSBTE DIPLOMA
-
May 2009 A single strut ISA 65 × 65 × 8 mm of a roof truss is 1.36 m long. It is connected by one rivet at each end. Calculate the safe load the strut can carry. Refer steel table for stress etc.
-
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SSDR previous year question papers?
This page is meant to help students खोज subject-wise SSDR previous year question papers for PSBTE Diploma Civil Engineering 6th semester.
02 Is SSDR the same as Steel Structures Design and Drawing?
Yes, SSDR refers to Steel Structures Design and Drawing for Civil Engineering 6th semester.
03 Can I use old SSDR papers for revision?
Yes, old SSDR papers are useful for revision, practice, and understanding the question pattern used in exams.
04 Are these official PSBTE question papers?
No. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find study material and previous year papers.
05 Do you provide solved SSDR papers?
This page is focused on previous year and old question papers. Solved papers may not be available for every year.