Solved question paper for SSDR May-2019 (DIPLOMA 6th)
Solved Question Paper
Steel structures design and drawing May-2019
PSBTE • DIPLOMA • Cvil Engineering • 6th • May-2019
SSDR for Punjab State Board of Technical Education in Diploma in Engineering, Civil Engineering, 6th Semester helps students find subject-wise previous year question papers and old papers for exam preparation. This page is useful for revision, understanding the exam pattern, and seeing how questions are framed in Steel Structures Design and Drawing. It is intended to support year-wise and semester-wise paper search for students looking for practice before exams. BRpaper is not the official website of the university or board, and the papers here should be used as study support for preparation and revision.
Solved Questions
Solved-
According to IS 800:1984, maximum permissible tensile stress in steel sections is ________ × fy.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
In IS 800:1984, symbol fy represents __________ stress in steel.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
For 28 mm diameter rivet, the diameter of rivet hole will be __________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Sectional area of “ISLC 150 @ 141.3 N/m” is __________ mm².Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
For 75° fusion angle, the effective throat thickness of 6 mm welds is ________ mm.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 What will be the effective throat thickness for 6mm weld for 90° fusion face?
-
-
Maximum pitch in rivets shall not exceed __________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Minimum pitch distance in rivets shall be two times of rivet diameter.
-
Dec 2017 Minimum pitch recommended is……………………times the diameter of rivet hole.
-
Dec 2008 The pitch of the rivets should not be less than ______ times the size of rivet.
-
-
Increase in carbon content in steel cause __________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
ΣV = 0, ΣH = 0 and ΣM = 0 are called __________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
In plate girder, bearing stiffeners are provided at __________.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
Zero bending stress occurs at __________ of beam.Fill in the Blanks 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Bending stress at neutral axis is _________.
-
May 2018 Bending stress at the neutral axis is ____________.
-
May 2010 Bending stress at the neutral axis is ____.
-
Dec 2007 In a beam, bending stress at the neutral axis is ____.
-
-
Beam is a flexural member.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
For Power Driven Shop Rivets (PDSR) allowable shear stress is 100 N/mm².True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
Minimum pitch distance in rivets shall be two times of rivet diameter.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2019 Maximum pitch in rivets shall not exceed __________.
-
Dec 2017 Minimum pitch recommended is……………………times the diameter of rivet hole.
-
Dec 2008 The pitch of the rivets should not be less than ______ times the size of rivet.
-
-
Brittle failure is not possible in welding.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Brittle failure is not possible in welding.
-
-
Strut is a member subjected to an axial pull.True / False 1 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Strut is a Tension member.
-
Dec 2016 A strut is a tension member.
-
-
Draw neat and labeled sketches of Lap Joint, Single Cover Butt Joint and Double Cover Butt Joint with riveted connections.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Calculate minimum number of rivets required to connect a 14 mm thick steel flat with a 12 mm thick gusset plate to support an axial pull of 230 kN for shop fabrication. Also specify diameter of rivets.Long Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Write the steps to design an axially loaded column.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2017 Give stepwise procedure to design axially loaded column.
-
Dec 2009 Give stepwise procedure to design axially loaded column.
-
-
What are purlins?Very Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Differentiate between clear span, effective span and total span of a beam with the help of sketches.Long Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
What are disadvantages of welding?Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Write disadvantages of welded joints.
-
May 2018 Explain the advantages and disadvantages of welded joint.
-
May 2017 Explain the advantages and disadvantages of welding.
-
-
What are laterally restrained beams? Explain with sketches.Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Write short note on laterally restrained beams.
-
May 2022 What are laterally supported beams?
-
May 2016 Write a short note on laterally restrained beams.
-
Dec 2015 What are laterally restrained beams?
-
May 2009 Define laterally restrained beams.
-
Dec 2009 What is laterally restrained beam?
-
Dec 2008 What are laterally restrained beams?
-
-
How depth of masonry wall foundation is decided?Short Answer 6 Marks May-2019 • PSBTE DIPLOMA
-
Dec 2018 How depth and width of a brick wall foundation is decided.
-
May 2015 How depth and width of a brick wall foundation is decided.
-
-
Design a simply supported beam of span 4.0 m to carry a superimposed load of 55 kN/m inclusive of its self-weight. The beam is laterally restrained throughout its length. (Assume missing data)Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
Write about various components of roof trusses (minimum ten).Short Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
Design a single angle discontinue strut of 2.0 m length to carry an axial compressive load of 100 kN, with welded end connection using 10 mm gusset plate. (Assume missing data)Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
May 2022 Design a single angle strut of 1.75m effective length to carry an axial compressive load of 100kN.
-
-
Design a 2.5 m long single angle section to act as tension member subjected to a tensile load of 160 kN, with shop riveted (PDSR) connections at end. Assume thickness of gusset plate.Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
-
Calculate the efficiency of joint shown in Figure A for shop fabrication.Long Answer 10 Marks May-2019 • PSBTE DIPLOMA
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find SSDR previous year question papers?
This page is meant to help students खोज subject-wise SSDR previous year question papers for PSBTE Diploma Civil Engineering 6th semester.
02 Is SSDR the same as Steel Structures Design and Drawing?
Yes, SSDR refers to Steel Structures Design and Drawing for Civil Engineering 6th semester.
03 Can I use old SSDR papers for revision?
Yes, old SSDR papers are useful for revision, practice, and understanding the question pattern used in exams.
04 Are these official PSBTE question papers?
No. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find study material and previous year papers.
05 Do you provide solved SSDR papers?
This page is focused on previous year and old question papers. Solved papers may not be available for every year.