Solved question paper for SSDR May-2020 (DIPLOMA 6th)

Home
psbte
diploma
civil
6th
ssdr
May-2020

Solved Question Paper

Steel structures design and drawing May-2020

PSBTE • DIPLOMA • Cvil Engineering • 6th • May-2020

SSDR for Punjab State Board of Technical Education in Diploma in Engineering, Civil Engineering, 6th Semester helps students find subject-wise previous year question papers and old papers for exam preparation. This page is useful for revision, understanding the exam pattern, and seeing how questions are framed in Steel Structures Design and Drawing. It is intended to support year-wise and semester-wise paper search for students looking for practice before exams. BRpaper is not the official website of the university or board, and the papers here should be used as study support for preparation and revision.

Question papers (year-wise) Solutions

Solved Questions

Solved

Explain the factors helpful in deciding the type of roof truss.

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 What are the factors governing the selection for the type of roof truss?

May 2015 Explain any two factors governing the selection for the type of roof truss.
Explain second degree of indeterminacy with suitable example.

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 Explain degree of indeterminacy with suitable example.

May 2015 Explain degree of indeterminacy with suitable example.
Draw a neat sketch showing the following terms: (i) Gauge line (ii) Diagonal pitch (iii) Edge distance (iv) Row of rivets (v) Lap length.

Long Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 Draw a neat sketch showing the following terms: row of rivets, staggered pitch, edge distance, gauge distance, row of rivets.

May 2015 Draw a neat sketch showing the following terms: (i) Row of rivets (ii) Staggered pitch (iii) Edge distance
Give importance of plug and slot welds in welded connections.

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 Give utility of plug and slot weld in welded connections.

May 2015 Give utility of plug and slot weld in welded connections.

Explain any two non-destructive tests for inspection of welded joints.

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
What are the various types of roof covering materials for sloped roof trusses?

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write short note on web stiffeners and their role in plate girders.

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 Explain different components of a plate girder.

Dec 2018 Write short note on stiffeners and their role in plate girders.

Dec 2017 Discuss elements of a plate girder.

Dec 2016 Explain vertical stiffeners of a plate girder.

Dec 2016 Explain horizontal stiffeners of a plate girder.
How web buckling is different from web crippling in rolled steel beams?

Short Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 How would you differentiate between web buckling and web crippling in case of rolled steel beams?

May 2015 How would you differentiate between web buckling and web crippling in case of rolled steel beams?

Design of brick masonry wall foundation.

Long Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Fabrication and erection of steel structures.

Long Answer 5 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
ISA 150 X 115 X 8 mm is to be connected to a gusset plate 12 mm thick at the extremities of the longer leg, the shorter leg being outstanding. Find the length of the welds required to make the joint. Design the welded joint taking permissible shear stress in weld = 108 N/mm2 and permissible tensile stress = 150 N/mm2.

Long Answer 10 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Design a T-section to act as a tension member carrying an axial load of 220 kN. Draw a neat sketch of the riveted end connection.

Long Answer 10 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2018 Design a T-section to act as a tension member carrying an axial load of 220 kN. Draw a neat sketch of the riveted end connection.

May 2015 Design a T-section to act as a tension member carrying an axial load of 220 kN. Draw a neat sketch of the riveted end connection.

A single riveted lap joint with chain riveting is to be made for joining two plates of 10 mm and 12 mm thickness. Find out the rivet diameter, pitch of rivets and efficiency of riveted joint using Power Driven Field Rivets.

Long Answer 10 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
A discontinuous double angle strut carries a compressive load of 165 kN. The angles are placed back to back and on the same side of the gusset plate 8 mm thick. The length of the strut is 2.15 m. Design the suitable double angle section and also design the welded end connections.

Long Answer 10 Marks May-2020 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 A discontinuous double angle strut carries a compressive load of 155kN. The angles are place back-to-back and on the same side of the gusset plate 8 mm thick. The length of the strut is 2.15m. Design the suitable double angle section also designs the welded end connection.

Explore all data

FAQ

Frequently Asked Questions

Answers about this subject, solved papers, and preparation.

Updated regularly

01 Where can I find SSDR previous year question papers?

This page is meant to help students खोज subject-wise SSDR previous year question papers for PSBTE Diploma Civil Engineering 6th semester.

02 Is SSDR the same as Steel Structures Design and Drawing?

Yes, SSDR refers to Steel Structures Design and Drawing for Civil Engineering 6th semester.

03 Can I use old SSDR papers for revision?

Yes, old SSDR papers are useful for revision, practice, and understanding the question pattern used in exams.

04 Are these official PSBTE question papers?

No. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find study material and previous year papers.

05 Do you provide solved SSDR papers?

This page is focused on previous year and old question papers. Solved papers may not be available for every year.

Solved question paper for SSDR May-2020 (DIPLOMA 6th)

Steel structures design and drawing May-2020

Solved Questions

Explore all data

PTU

PU Chandigarh

PSBTE

PSEB(School)

BFUHS

PU-PATIALA

GNDU

HPTSB

GTU

MDU

MRSPTU

CBSE(School)

BSEH

UBSE

PTU DISTANCE EDUCATION

Frequently Asked Questions