Solved question paper for SSDR May-2022 (DIPLOMA 6th)

Home
psbte
diploma
civil
6th
ssdr
May-2022

Solved Question Paper

Steel structures design and drawing May-2022

PSBTE • DIPLOMA • Cvil Engineering • 6th • May-2022

SSDR for Punjab State Board of Technical Education in Diploma in Engineering, Civil Engineering, 6th Semester helps students find subject-wise previous year question papers and old papers for exam preparation. This page is useful for revision, understanding the exam pattern, and seeing how questions are framed in Steel Structures Design and Drawing. It is intended to support year-wise and semester-wise paper search for students looking for practice before exams. BRpaper is not the official website of the university or board, and the papers here should be used as study support for preparation and revision.

Question papers (year-wise) Solutions

Solved Questions

Solved

Write full form of ISNT.

Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
How many flanges does a Tee Section have?

Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
What will be the effective throat thickness for 6mm weld for 90° fusion face?

Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2019 For 75° fusion angle, the effective throat thickness of 6 mm welds is ________ mm.
Define strut.

Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

What is a short column?

Very Short Answer 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
__________ is provided under the bolt to prevent the bolt from bearing.

Fill in the Blanks 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Partial safety factor for material if HSFG bolt is __________.

Fill in the Blanks 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
A truss is usually loaded at the __________ of its members.

Fill in the Blanks 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2018 A truss is usually loaded at the ____________ of its member.

Dec 2018 A truss is usually loaded at the _____ of its members.

The function of vertical __________ is to prevent buckling of web.

Fill in the Blanks 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
The process of preparing components ready for assemble at the site is termed as _________.

Fill in the Blanks 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Percentage of Carbon increases ductility in steel.

True / False 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Brittle failure is not possible in welding.

True / False 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2019 Brittle failure is not possible in welding.

Strength of tension member = Net area × Permissible tensile stress.

True / False 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Channel sections can’t be used as purlins.

True / False 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
ISBH can be used as column sections.

True / False 1 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write disadvantages of welded joints.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2019 What are disadvantages of welding?

May 2018 Explain the advantages and disadvantages of welded joint.

May 2017 Explain the advantages and disadvantages of welding.

Write different modes of failure of a tension member.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write short note on block shear failure.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write various steps involved in design of compression member.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Explain IS specifications for providing taking rivets in Compression member.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Draw neat sketch of gusseted column base.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write short note on Grillage Foundation.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Write short note on laterally restrained beams.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2022 What are laterally supported beams?

May 2019 What are laterally restrained beams? Explain with sketches.

May 2016 Write a short note on laterally restrained beams.

Dec 2015 What are laterally restrained beams?

May 2009 Define laterally restrained beams.

Dec 2009 What is laterally restrained beam?

Dec 2008 What are laterally restrained beams?
Write names of various steps involved in fabrication of steel structures.

Short Answer 5 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.

Calculate efficiency of joint shown in Figure-1. Bolts used for joint are of 16mm diameter and 4.6 Grade.

Long Answer 10 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Design a tension member of 2m length using angle section to carry an axial pull of 140kN when it is fillet welded at end with gusset plate.

Long Answer 10 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Design a single angle strut of 1.75m effective length to carry an axial compressive load of 100kN.

Long Answer 10 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2019 Design a single angle discontinue strut of 2.0 m length to carry an axial compressive load of 100 kN, with welded end connection using 10 mm gusset plate. (Assume missing data)
Explain different components of a plate girder.

Long Answer 10 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
May 2020 Write short note on web stiffeners and their role in plate girders.

Dec 2018 Write short note on stiffeners and their role in plate girders.

Dec 2017 Discuss elements of a plate girder.

Dec 2016 Explain vertical stiffeners of a plate girder.

Dec 2016 Explain horizontal stiffeners of a plate girder.

Explain various components of a roof truss.

Long Answer 10 Marks May-2022 • PSBTE DIPLOMA

Existing answers are stored as HTML; you can edit directly without converting to Markdown.
Dec 2009 State the various parts of roof truss.

Explore all data

FAQ

Frequently Asked Questions

Answers about this subject, solved papers, and preparation.

Updated regularly

01 Where can I find SSDR previous year question papers?

This page is meant to help students खोज subject-wise SSDR previous year question papers for PSBTE Diploma Civil Engineering 6th semester.

02 Is SSDR the same as Steel Structures Design and Drawing?

Yes, SSDR refers to Steel Structures Design and Drawing for Civil Engineering 6th semester.

03 Can I use old SSDR papers for revision?

Yes, old SSDR papers are useful for revision, practice, and understanding the question pattern used in exams.

04 Are these official PSBTE question papers?

No. BRpaper is not the official website of Punjab State Board of Technical Education. It only helps students find study material and previous year papers.

05 Do you provide solved SSDR papers?

This page is focused on previous year and old question papers. Solved papers may not be available for every year.

Solved question paper for SSDR May-2022 (DIPLOMA 6th)

Steel structures design and drawing May-2022

Solved Questions

Explore all data

PTU

PU Chandigarh

PSBTE

PSEB(School)

BFUHS

PU-PATIALA

GNDU

HPTSB

GTU

MDU

MRSPTU

CBSE(School)

BSEH

UBSE

PTU DISTANCE EDUCATION

Frequently Asked Questions