Solved question paper for MP May-2008 (DIPLOMA 4th)

Solved Question Paper

Microprocessors May-2008

PSBTE • DIPLOMA • Information Technology • 4th • May-2008

Microprocessors for Punjab State Board of Technical Education Diploma in Engineering Information Technology 4th semester is a subject page where students can quickly find subject-wise previous year question papers and exam-preparation material. It helps with revision, understanding recurring question styles, and getting familiar with the exam pattern and marking approach used in past papers. Use this page to check whether Microprocessors PYQ material is available before opening the subject page, and to support focused study for semester exams. BRpaper is not the official website of Punjab State Board of Technical Education or any university or board.

Solved Questions

Solved
  1. The __________ generates signals within microprocessor to carry out the instruction, which has been decoded.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  2. The __________ performs the actual numerical and logic operation such as add, subtract, AND, OR, etc. in a microprocessor.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  3. The accumulator is an __________ bit register in 8085.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  4. The instruction JC (Jump on Carry) is implemented to change the sequence of a program when __________ flag is set.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  5. The total number of address lines in 8085 is __________.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  6. HLDA stands for __________.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  7. INTR stands for __________.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  8. Interrupt is a __________ interrupt.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  9. SID stands for __________.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  10. 8257 is a __________ controller.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  11. What are status flags? Explain their importance.
    Long Answer 6 Marks May-2008 • PSBTE DIPLOMA
  12. Explain the syntax and meaning of the instruction MVI.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  13. Explain the syntax and meaning of the instruction DAA.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  14. Explain the concept of DMA data transfer.
    Long Answer 6 Marks May-2008 • PSBTE DIPLOMA
  15. Explain the function of Push and Pop instructions.
    Long Answer 6 Marks May-2008 • PSBTE DIPLOMA
  16. Explain any two addressing modes of 8085.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  17. Discuss the need of serial I/O controller in 8085.
    Long Answer 6 Marks May-2008 • PSBTE DIPLOMA
  18. Explain the various types of interrupts in 8085.
    Long Answer 6 Marks May-2008 • PSBTE DIPLOMA
  19. Draw the pin diagram of 8085 and explain the meaning of various pins.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  20. Describe the functioning of 8253 with block diagram.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  21. Compare the important features of Z-80, 6800 and 8085 microprocessors.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  22. Draw and explain the block diagram of 8251 communication interface adapter.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  23. Explain the term instruction cycle.
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  24. Explain the term machine cycle.
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  25. Explain the term T-states.
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  26. Explain the term fetch cycle.
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  27. Explain the term execute cycle.
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  28. i. ______ generates signals within microprocessor to carry out the instruction, which has been decoded.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  29. ii. The ______ performs the actual numerical and logic operation such as ‘add’, ‘subtract’, ‘AND’, ‘OR’, etc. in a microprocessor.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  30. iii. The accumulator is an ______ bit register in 8085.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  31. iv. The instruction JC (Jump on Carry) is implemented to change the sequence of a program when ______ flag is set.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  32. v. The total number of address lines in 8085 is ______.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  33. vi. HLDA stands for ______.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  34. vii. INTR stands for ______.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  35. viii. ______ Interrupt is a nonmaskable restart interrupt.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  36. ix. SID stands for ______.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  37. x. 8257 is a ______ controller.
    Fill in the Blanks 1.5 Marks May-2008 • PSBTE DIPLOMA
  38. i. What are status flags? Explain their importance.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  39. ii. (a) MVI
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  40. ii. (b) DAA
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  41. iii. Explain the concept of DMA data transfer.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  42. iv. Explain the function of Push and Pop instructions.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  43. v. Explain any two addressing modes of 8085.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  44. vi. Discuss the need of serial I/O controller in 8085.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  45. vii. Explain the various types of interrupts in 8085.
    Short Answer 6 Marks May-2008 • PSBTE DIPLOMA
  46. Q.3 Draw the pin diagram of 8085 and explain the meaning of various pins.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  47. Q.4 Describe the functioning of 8253 with block diagram.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  48. Q.5 Compare the important features of z-80, 6800 and 8085 microprocessors.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  49. Q.6 Draw and explain the block diagram of 8251 communication interface adapter.
    Long Answer 10 Marks May-2008 • PSBTE DIPLOMA
  50. Q.7 (a) instruction cycle
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  51. Q.7 (b) machine cycle
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  52. Q.7 (c) t-states
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  53. Q.7 (d) fetch cycle
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA
  54. Q.7 (e) execute cycle
    Short Answer 10 Marks May-2008 • PSBTE DIPLOMA

Explore all data

FAQ

Frequently Asked Questions

Answers about this subject, solved papers, and preparation.

Updated regularly
01 Where can I find Microprocessors previous year question papers for PSBTE Diploma IT 4th semester?

You can use this subject page to look for Microprocessors PYQ material for PSBTE Diploma IT 4th semester and check availability before opening the paper.

02 Does this page provide subject-wise question papers for Diploma Information Technology semester 4?

This page is meant for subject-wise discovery, so students can quickly find Microprocessors previous year question papers for the 4th semester IT course.

03 Can I use old Microprocessors papers for revision?

Yes. Old question papers help students revise important topics, understand repeated question styles, and get a better idea of the exam pattern.

04 Is a solved paper or answer key guaranteed here?

Not always. BRpaper focuses on helping students find question papers, and any solved paper or answer key depends on what is available for this subject page.

05 Can I download the Microprocessors question paper PDF?

If a PDF is available for this subject, you can view or download it from the subject page. Availability may vary by paper.