Solved question paper for EGD Dec-2024 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design Dec-2024
PTU • B-TECH • Information Technology • 1st-2nd • Dec-2024
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
SECTION-B&C have FOUR questions each. yO |Short Answer Dec-2024 • PTU B-TECH
-
May 2024 SECTION-B&C have FOUR questions each.
-
Dec 2024 SECTION -B & C have FOUR questions each.
-
Dec 2023 SECTION -B &C. have FOUR questions each.
-
-
Select atleast TWO questions from SECTION-B&C. ' SECTION-AShort Answer Dec-2024 • PTU B-TECH
-
May 2024 Select atleast TWO questions from SECTION -B&C.
-
Dec 2024 Select at least TWO questions from SECTION-B&C.
-
-
Write short notes on: | .Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Write short notes on :
-
-
Explain with the help of an example the Unidirectional ‘system of placement of dimensions. . | b) Show by means of traces, a plane perpendicular to both HP and VP.Short Answer Dec-2024 • PTU B-TECH
-
What do you mean by Representative Fraction (RF)? |Short Answer Dec-2024 • PTU B-TECH
-
Dec 2023 What do you mean by representative fraction (RF)?
-
-
Explain Frustum and Truncated Solids with.a suitable drawing. |Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write a short notes on: h) Explain Frustum and Truncated Solids with a suitable drawing.
-
May 2024 Explain Frustum and Truncated Solids with a suitable freehand drawing.
-
May 2023 Write short notes on :\r\na) Differentiate between Frustum and Truncated Solid.
-
-
Explain the difference between 1* Angle Projection and 3™ Angle Projection.Short Answer Dec-2024 • PTU B-TECH
-
Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
How will you represent Glass and Wood ona drawing sheet?Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write a short notes on: a) How will you represent Glass and Wood on a drawing sheet?
-
-
What are right solids and oblique solids? Explain with a suitable freehand drawing.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2023 What are right solids and oblique solids? Explain with a suitable freehand drawing.
-
-
Print the following statement with single stroke capital vertical letters of height 10mm: : "EXCUSES ARE THE NAILS THAT BUILD THE HOUSE OF FAILURE"Short Answer Dec-2024 • PTU B-TECH
-
Draw aregular Hexagonal Lamina of side 55mm. ) 4 | M-93799 Ao ($1)-2235 Bir paner SECTION-B exams preparatory +, )Short Answer Dec-2024 • PTU B-TECH
-
Draw a Diagonal Scale of R.F=1/40 to read meters, decimeters and centimeters and long enough to measure up to 8m. | ! |Short Answer Dec-2024 • PTU B-TECH
-
A point "E" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest'distance from the reference line. .Short Answer Dec-2024 • PTU B-TECH
-
May 2025 A point \\\"N\\\" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
May 2025 A point \\\"M\\\" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2025 A point \\\"M\\\" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
May 2023 A point \\\"M\\\" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"M\\\" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
Plan and elevation of a line "AB" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant. : 5. End "C" of line' CD is 13 mm above HP and 51 mm in front of VP and end "D" 12 mm behind the VP-and 35 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, 6, ®, HT and VT, : De - SECTION-C 3 |Short Answer Dec-2024 • PTU B-TECH
-
May 2025 A line \\\"EF\\\" is lying on profile plan. Its end \\\"E\\\" is 45mm in front of VP and 10mm above HP and end \\\"F\\\" is 10mm in front of VP and 50mm above HP. Draw its projections and determine the true length, traces and inclination with the reference planes.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 75mm long, measure 65mm and 50 mm respectively. End A is in HP and 12mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in first quadrant.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant.
-
May 2023 Line \\\"AB\\\" is lying on profile plane. Its end \\\"A\\\" is 44mm in front of VP & 12 mm above HP and end \\\"B\\\" is 8mm in front of VP & 52mm above HP. Draw its projection and find, True Length, inclinations with the principle planes, HT and VT.
-
-
A regular hexagonal thin plate of 45mm side is resting on one of its corners in HP, Draw its projections when the plate surface is vertical and inclined to VP at 30°. Also show traces, Assume the said plate lying in first quadrant.Short Answer Dec-2024 • PTU B-TECH
-
May 2023 A regular hexagonal thin plate of 45mm side has a central circular hole of 45mm diameter at its center. It is resting on one of its corners in HP. Draw its projections when the plate surface is vertical and inclined to VP at 30°.
-
-
A right regular triangular prism of base edge 42mm, axis 62mm long is resting on its rectangular face on HP, with axis parallel to both HP and’ VP. Draw its projections. fA right regular square pyramid. of base edge -45.mm and. axis 52 mm long; rests:on its base on HP with one of its base edges parallel to VP. Draw its projections assuming the ) pyramid in 1" quadrant. 9, Draw isometric drawing of a pentagonal prism of base edge 45mm and axis 65mm long. _ NOTE; Disclosure of Identity by writing Mobile No. or Marking of passing request on any paper of Answer Sheet will lead to UMC against the Student. 2 | M-93799 ; “ . ao ee | ~- (§1)-2235Short Answer Dec-2024 • PTU B-TECH
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.