Solved question paper for EGD Dec-2025 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design Dec-2025
PTU • B-TECH • Information Technology • 1st-2nd • Dec-2025
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Write short notes on :Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Write short notes on: | .
-
-
Write the following statement using single stroke capital vertical letters of 12 mm size: "IWHOVER IS HAPPY WILL MAKE OTHERS HAPPY TOO".Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Write the following statement using single stroke capital vertical Ictters of 12 mm size: \"WHOEVER IS HAPPY WILL MAKE OTHERS HAPPY TOO\".
-
-
Explain any two types lines used in Engineering Drawing.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Explain any two types Lines used in Engineering Drawing.
-
Dec 2023 1(a) Explain any two types Lines used in Engineering Drawing.
-
Dec 2023 Explain any two types of Lines used in Engineering Drawing.
-
-
Explain with the help of an example the unidirectional system of placement of dimensions.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Explain with the help of an example the unidirectional system of placement of dimensions.
-
May 2023 Write short notes on :\r\nc) Explain with the help of an example the Unidirectional system of placement of dimensions.
-
Dec 2023 Explain with the help of an example the Unidirectional system of placement of dimensions.
-
-
What is difference between plane scale and diagonal scale?Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
May 2025 Write short notes on: f) What is the difference between plain scale and diagonal scale?
-
Dec 2024 What is difference between plane scale and diagonal scale?
-
May 2023 Write short notes on :\r\nd) What is difference between plane scale and diagonal scale?
-
-
Draw a regular Hexagonal Lamina of side 65mm.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Draw a regular Hexagonal Lamina of side 65mm.
-
-
How will you represent Metals and Glass on a drawing sheet?Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
May 2024 How will you represent Liquid and Glass on a drawing sheet?
-
Dec 2024 How will you represent Metals and Glass on a drawing sheet?
-
-
Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
Show by means of traces, a plane perpendicular to HP and inclined to VP.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Differentiate between Frustum and Truncated solid.Very Short Answer 2 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Differentiate between Frustum and Truncated solid.
-
-
Differentiate Isometric Projections and Isometric Drawing.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
May 2025 Write short notes on: a) Explain the terms isometric drawing and isometric projection.
-
Dec 2024 Differentiate Isometric Projections and Isometric Drawing. exams paper
-
May 2023 Write short notes on :\r\nb) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 Write briefly: b) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 1(g) Explain the difference between an isometric projection and isometric drawing.
-
-
Line "KL" 68mm long; has its end "K" both in HP and VP. It is inclined at 42° to the "HP" and 33° to the "VP". Draw its projections when the line is lying in first quadrant.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
Dec 2023 Line \\\"KP\\\" 68 mm long; has its end \\\"K\\\" on HP and 22 mm from VP. It is inclined at 42° to the W and 35° to the \\\"HP\\\". Draw its projections when the line is lying in first quadrant.
-
-
A line CD has its end "C" 10 mm above HP and 15 mm in front of VP. End "D" 42 mm above HP and 58 mm in front of VP. The distance between the end projectors is 48 mm. Draw the true length, true inclinations with principal planes, HT and VT.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
Dec 2024 Aline CD has its end \"C\" 10 mm above HP and 15 mm in front of VP, End \"D\" 42 mm above HP and 58 mm in front of VP. The distance between the end projectors, is 48 mm. Draw the projections of the line and find out its true length, true inclinations with principle planes, HT and VT.
-
-
A point "M" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
May 2025 A point \\\"N\\\" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
May 2025 A point \\\"M\\\" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2024 A point \"E\" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest\'distance from the reference line. .
-
May 2023 A point \\\"M\\\" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"M\\\" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
Construct a Plane Scale of R.F.= 1:40 to read meters and decimeters and long enough to measure up to 6m. Indicate 4.4m on the scale.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
A hexagonal prism of side of base 28mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its projections.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
May 2025 A right regular triangular prism of base edge 40mm, axis 65mm long is resting on its rectangular face on HP, with axis parallel to both HP and VP. Draw its projections.
-
Dec 2024 A hexagonal prism of side of base 26mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its | projections.
-
-
A circular lamina of diameter 42mm is inclined to VP at 44° and perpendicular to HP and it is resting on VP on a point on its circumference. Draw its projections. Also show traces.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.Long Answer 8 Marks Dec-2025 • PTU B-TECH
-
May 2024 A cone of base diameter 48 mm and axis 62 mm long is lying on HP on its generator with | axis parallel to VP/Draw its projections assuming the cone lying in first quadrant.
-
May 2023 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
Dec 2023 A cone of base diameter 45 mm and axis 58 mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadrant.
-
Dec 2023 A cone of base diameter 50 mm and axis.65>mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadfant.
-
-
Draw the isometric drawing of the Frustum of a right regular hexagonal pyramid, side of the base hexagon is 20 mm, side of top hexagon is 10 mm, and the height of the frustum is 40 mm.Long Answer 8 Marks Dec-2025 • PTU B-TECH
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.