Solved question paper for EGD May-2024 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design May-2024
PTU • B-TECH • Information Technology • 1st-2nd • May-2024
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Tech. (AE/AI & ML/ Al & DS/EEE/A&R/CE/CSE/DS/EE/ECE/FT/IT/ME/ “* internet of Things and Cyber Security including Block Chain Technology) (Sem.—1,2) ENGINEERING GRAPHICS & DESIGN Subject Code: BTME101/21 M.Code : 91335 | Date of Examination : 19-06-2024Short Answer May-2024 • PTU B-TECH
-
Dec 2024 Tech. (AE/AI&ML/AI&DS/IOT/A&R/CE/CSE/DS/EEE/EE/ECE/FT/IT/ ME/Internet of Things and Cyber Security including Block Chain Technology)(Sem.—1,2) ENGINEERING GRAPHICS & DESIGN Subject Code : BTME101-21 M.Code : 91335 Date of Examination : 14-01-2025
-
-
SECTION-B&C have FOUR questions each.Short Answer May-2024 • PTU B-TECH
-
Dec 2024 SECTION-B&C have FOUR questions each. yO |
-
Dec 2024 SECTION -B & C have FOUR questions each.
-
Dec 2023 SECTION -B &C. have FOUR questions each.
-
-
Select atleast TWO questions from SECTION -B&C.Short Answer May-2024 • PTU B-TECH
-
Dec 2024 Select atleast TWO questions from SECTION-B&C. \' SECTION-A
-
Dec 2024 Select at least TWO questions from SECTION-B&C.
-
-
Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;Short Answer May-2024 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
What are isometric lines and non-isometric lines? |Short Answer May-2024 • PTU B-TECH
-
How will you represent Liquid and Glass on a drawing sheet?Short Answer May-2024 • PTU B-TECH
-
Dec 2025 How will you represent Metals and Glass on a drawing sheet?
-
Dec 2024 How will you represent Metals and Glass on a drawing sheet?
-
-
Write the following statement using single stroke capital vertical letters of 12 mm size: "CLEANLINESS IS A SIGN OF OUR TRUE BEAUTY, NOT JUST A DUTY" —— e) What do you mean by representative fraction (RF)?Short Answer May-2024 • PTU B-TECH
-
Draw a regular Pentagonal Lamina of side 52mm.Short Answer May-2024 • PTU B-TECH
-
May 2025 Write a short notes on: d) Draw a regular Pentagonal Lamina of side 55mm.
-
Dec 2023 Draw a regular Pentagonal Lamina of side 55mm.
-
Dec 2023 1(f) Draw a regular Pentagonal Lamina of side 55mm.
-
-
Explain the methods of placement of Dimensions with a suitable freehand drawing.Short Answer May-2024 • PTU B-TECH
-
May 2025 Write a short notes on: e) Explain the types of methods of Dimensioning with a suitable drawing.
-
May 2023 Write short notes on :\r\ne) Explain the types of Dimensions with a suitable drawing.
-
Dec 2023 Write briefly: e) Explain the types of dimensions with a suitable drawing.
-
Dec 2023 Explain the types of Dimensions with a suitable drawing.
-
-
Show by means of traces, a plane perpendicular to VP and HP.Short Answer May-2024 • PTU B-TECH
-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Draw projections of a line lying on a Profile Plane whose front view is larger than its top view. Which angle is bigger "0" or "6"? Show with the help of a suitable free hand drawing.Short Answer May-2024 • PTU B-TECH
-
May 2025 Write a short notes on: g) Draw the projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger \"θ\" or \"φ\"? Show with the help of a suitable free hand drawing.
-
Dec 2023 1(c) Draw projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger \"θ\" or \"φ\"? Show with the help of a suitable free hand drawing.
-
-
Explain Frustum and Truncated Solids with a suitable freehand drawing.Short Answer May-2024 • PTU B-TECH
-
May 2025 Write a short notes on: h) Explain Frustum and Truncated Solids with a suitable drawing.
-
Dec 2024 Explain Frustum and Truncated Solids with.a suitable drawing. |
-
May 2023 Write short notes on :\r\na) Differentiate between Frustum and Truncated Solid.
-
-
24-91335 | i$i)-zZ301 exams paperShort Answer May-2024 • PTU B-TECH
-
<A point "R" is 49mm behind VP and 65mm below HP. Draw its projections and find out its shortest distance from the reference line. -* 3 End "P" of line 'PK' is 15 mm above HP and 44 mm in front of VP and end "K" 10 mm behind VP and 29 mm below HP. The end projectors are 58 mm apart. Draw the projections and find TL, 6, ¢, HT and VT. 4, Line "MK" 68 mm long has its end "M" both in HP and VP. It is inclined at 42° to the "HP" and 37° to the "VP". Draw its projections when the line is lying in first quadrant. - § The distance between Delhi and Agra is 200 km. In a railway map it is represented by a line 5 cm long. Find its R.F. Draw a diagonal scale to show single km and maximum 600 km. — SECTION-CShort Answer May-2024 • PTU B-TECH
-
A cone of base diameter 48 mm and axis 62 mm long is lying on HP on its generator with | axis parallel to VP/Draw its projections assuming the cone lying in first quadrant.Short Answer May-2024 • PTU B-TECH
-
Dec 2025 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
May 2023 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
Dec 2023 A cone of base diameter 45 mm and axis 58 mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadrant.
-
Dec 2023 A cone of base diameter 50 mm and axis.65>mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadfant.
-
-
_ A circular lamina of.diameter 54mm, having a central square hole of side 25mm, is resting on HP on a point on its circumference. The sides. ofthe square hole are equally ‘nclined to HP. Draw its projections when the said lamina is perpendicular to HP and parallel to and 20 mm from VP.Short Answer May-2024 • PTU B-TECH
-
Draw isometric drawing of the following cut sphere: | R 25 ees | (a) a 2 | 2.2-91335 | (51)-259 | ph Paper i orthographic es. wtew of the Frustum of @ Pentagonal Pyramid whose . Draw isometric VIC’ I " projections are given as follows: ee Done X : y ing request on any losure of Identity by writing Mobile No. or geslarl ri Lara} iil tera aper of Answer Sheet will lead to UMC agains P ($1)-2351 3] 11-91359 | www.brpaper.comShort Answer May-2024 • PTU B-TECH
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.