Solved question paper for EGD May-2025 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design May-2025
PTU • B-TECH • Information Technology • 1st-2nd • May-2025
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Write a short notes on: a) How will you represent Glass and Wood on a drawing sheet?Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2024 How will you represent Glass and Wood ona drawing sheet?
-
-
Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Write a short notes on: c) Explain with the help of an example the Aligned system of placement of dimensions.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2023 Write briefly: c) Explain with the help of an example the Aligned system of placement of dimensions.
-
Dec 2023 1(i) Explain with the help of an example the Aligned system of placement of dimensions.
-
-
Write a short notes on: d) Draw a regular Pentagonal Lamina of side 55mm.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2024 Draw a regular Pentagonal Lamina of side 52mm.
-
Dec 2023 Draw a regular Pentagonal Lamina of side 55mm.
-
Dec 2023 1(f) Draw a regular Pentagonal Lamina of side 55mm.
-
-
Write a short notes on: e) Explain the types of methods of Dimensioning with a suitable drawing.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2024 Explain the methods of placement of Dimensions with a suitable freehand drawing.
-
May 2023 Write short notes on :\r\ne) Explain the types of Dimensions with a suitable drawing.
-
Dec 2023 Write briefly: e) Explain the types of dimensions with a suitable drawing.
-
Dec 2023 Explain the types of Dimensions with a suitable drawing.
-
-
Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
Write a short notes on: g) Draw the projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger "θ" or "φ"? Show with the help of a suitable free hand drawing.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2024 Draw projections of a line lying on a Profile Plane whose front view is larger than its top view. Which angle is bigger \"0\" or \"6\"? Show with the help of a suitable free hand drawing.
-
Dec 2023 1(c) Draw projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger \"θ\" or \"φ\"? Show with the help of a suitable free hand drawing.
-
-
Write a short notes on: h) Explain Frustum and Truncated Solids with a suitable drawing.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2024 Explain Frustum and Truncated Solids with a suitable freehand drawing.
-
Dec 2024 Explain Frustum and Truncated Solids with.a suitable drawing. |
-
May 2023 Write short notes on :\r\na) Differentiate between Frustum and Truncated Solid.
-
-
Write a short notes on: i) Print the following statement with single stroke capital vertical letters of height 10mm : "IT'S SIMPLE TO BE HAPPY, IT'S VERY DIFFICULT TO BE SIMPLE"Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write a short notes on: j) Explain the importance of a title block.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2023 1(e) Explain the importance of a title block.
-
-
Construct a Diagonal Scale of R.F. = 1:5000 to read up to single meter and long enough to measure up to 600m. Assume suitably any missing data.Long Answer 8 Marks May-2025 • PTU B-TECH
-
A point "M" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 A point \\\"N\\\" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2025 A point \\\"M\\\" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2024 A point \"E\" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest\'distance from the reference line. .
-
May 2023 A point \\\"M\\\" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"M\\\" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
Plan and elevation of a line "AB" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 A line \\\"EF\\\" is lying on profile plan. Its end \\\"E\\\" is 45mm in front of VP and 10mm above HP and end \\\"F\\\" is 10mm in front of VP and 50mm above HP. Draw its projections and determine the true length, traces and inclination with the reference planes.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 75mm long, measure 65mm and 50 mm respectively. End A is in HP and 12mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in first quadrant.
-
Dec 2024 Plan and elevation of a line \"AB\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant. : 5. End \"C\" of line\' CD is 13 mm above HP and 51 mm in front of VP and end \"D\" 12 mm behind the VP-and 35 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, 6, ®, HT and VT, : De - SECTION-C 3 |
-
May 2023 Line \\\"AB\\\" is lying on profile plane. Its end \\\"A\\\" is 44mm in front of VP & 12 mm above HP and end \\\"B\\\" is 8mm in front of VP & 52mm above HP. Draw its projection and find, True Length, inclinations with the principle planes, HT and VT.
-
-
End "A" of line AB is 15 mm above HP and 48 mm in front of VP and end "B" 13 mm behind the VP and 28 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, θ, Φ, HT and VT.Long Answer 8 Marks May-2025 • PTU B-TECH
-
Dec 2023 End \\\"A\\\" of line AB is 18mm above HP and 40mm in front of VP and end \\\"B\\\" 15mm behind the VP and 25mm below the HP. The end projectors are 45mm apart. Draw the projections and find TL, θ, φ, HT and VT.
-
Dec 2023 End \\\"A\\\" of a line AB is 49 mm in front of VP and 11 mm above HP and end \\\"WB\\\" is 7 mm in front of VP and 59 mm above HP. The distance between end projectors is 52mm. Draw its projection and find TL, θ, Φ, HT and VT.
-
Dec 2023 A line \"AB\" is contained by a profile plane. Its end \"A\" is 49 mm in front of VP and II mm above HP and end \"B\" is 7 mm in front of VP and 59 mm above HP. Draw its projection and find TL, 0, 6, HT and VT.
-
-
A regular hexagonal lamina of side 45 mm having a central circular hole of diameter 45 mm is resting on one of its corners on VP such that one of its base edges is perpendicular to VP. Draw its projections when the said lamina is parallel to HP.Long Answer 8 Marks May-2025 • PTU B-TECH
-
Dec 2023 A regular hexagonal lamina of side 48mm having a central circular hole of diameter 48mm is resting on one of its corners on HP such that one of its base edges is perpendicular to HP. Draw its projections when the said lamina is parallel to VP.
-
-
A right regular triangular prism of base edge 40mm, axis 65mm long is resting on its rectangular face on HP, with axis parallel to both HP and VP. Draw its projections.Long Answer 8 Marks May-2025 • PTU B-TECH
-
Dec 2025 A hexagonal prism of side of base 28mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its projections.
-
Dec 2024 A hexagonal prism of side of base 26mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its | projections.
-
-
A right regular square pyramid of base edge 45 mm and axis 52 mm long, rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2023 A right regular square pyramid of base edge 42mm and axis 65 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.
-
Dec 2023 A right regular square pyramid of base edge 54mm and axis 68 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in Ist quadrant.
-
Dec 2023 A right regular pentagonal pyramid of base edge 32mm and axis 63mm long rests on its base on the HP such that one of its base edges is perpendicular to VP. Draw its projections.
-
-
Draw isometric Projections of the following :Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 Draw the isometric drawing with the following orthographic projections :
-
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.