Solved question paper for EGD Dec-2023 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design Dec-2023
PTU • B-TECH • Mechanical Engineering • 1st-2nd • Dec-2023
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
1(a) Explain any two types Lines used in Engineering Drawing.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
Dec 2025 Explain any two types lines used in Engineering Drawing.
-
Dec 2024 Explain any two types Lines used in Engineering Drawing.
-
Dec 2023 Explain any two types of Lines used in Engineering Drawing.
-
-
1(b) Explain the following terms with a suitable drawing: Apex, Slant Height, Base Rim and Generator.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write short notes on: j) Explain the following terms with a suitable freehand drawing: Apex, Slant Height, Base Rim and Generator.
-
Dec 2023 Write briefly: a) Explain the following terms with a suitable drawing: Apex, Slant Height, Base Rim and Generator.
-
Dec 2023 Explain thefollowing terms with a suitable drawing: Apex, Slant Height, Base Rim and Generators
-
-
1(c) Draw projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger "θ" or "φ"? Show with the help of a suitable free hand drawing.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write a short notes on: g) Draw the projections of a line lying on a Profile Plane whose top view is larger than its front view. Which angle is bigger \"θ\" or \"φ\"? Show with the help of a suitable free hand drawing.
-
May 2024 Draw projections of a line lying on a Profile Plane whose front view is larger than its top view. Which angle is bigger \"0\" or \"6\"? Show with the help of a suitable free hand drawing.
-
-
1(d) Show conventional representation of Glass and Wood on a Drawing Sheet.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
1(e) Explain the importance of a title block.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write a short notes on: j) Explain the importance of a title block.
-
-
1(f) Draw a regular Pentagonal Lamina of side 55mm.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write a short notes on: d) Draw a regular Pentagonal Lamina of side 55mm.
-
May 2024 Draw a regular Pentagonal Lamina of side 52mm.
-
Dec 2023 Draw a regular Pentagonal Lamina of side 55mm.
-
-
1(g) Explain the difference between an isometric projection and isometric drawing.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write short notes on: a) Explain the terms isometric drawing and isometric projection.
-
Dec 2025 Differentiate Isometric Projections and Isometric Drawing.
-
Dec 2024 Differentiate Isometric Projections and Isometric Drawing. exams paper
-
May 2023 Write short notes on :\r\nb) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 Write briefly: b) Differentiate between Isometric Projections and Isometric View.
-
-
1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
1(i) Explain with the help of an example the Aligned system of placement of dimensions.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write a short notes on: c) Explain with the help of an example the Aligned system of placement of dimensions.
-
Dec 2023 Write briefly: c) Explain with the help of an example the Aligned system of placement of dimensions.
-
-
1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.Very Short Answer 2 Marks Dec-2023 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
Line "KP" 68 mm long; has its end "K" on HP and 22 mm from VP. It is inclined at 42° to the W and 35° to the "HP". Draw its projections when the line is lying in first quadrant.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
Dec 2025 Line \\\"KL\\\" 68mm long; has its end \\\"K\\\" both in HP and VP. It is inclined at 42° to the \\\"HP\\\" and 33° to the \\\"VP\\\". Draw its projections when the line is lying in first quadrant.
-
-
Draw a scale of R.F 1/50 to read meters and decimeters and long enough to measure up to 6m. Show 5.7m on the scale.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
Dec 2023 A map is to be drawn with RF 1:50. Construct a scale to read meters, decimals and centimeters and long enough to measure up to 6 m. Show on it a distance of 4.78 m.
-
-
A point "M" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
May 2025 A point \\\"N\\\" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
May 2025 A point \\\"M\\\" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2025 A point \\\"M\\\" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2024 A point \"E\" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest\'distance from the reference line. .
-
May 2023 A point \\\"M\\\" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
End "A" of a line AB is 49 mm in front of VP and 11 mm above HP and end "WB" is 7 mm in front of VP and 59 mm above HP. The distance between end projectors is 52mm. Draw its projection and find TL, θ, Φ, HT and VT.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
May 2025 End \\\"A\\\" of line AB is 15 mm above HP and 48 mm in front of VP and end \\\"B\\\" 13 mm behind the VP and 28 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, θ, Φ, HT and VT.
-
Dec 2023 End \\\"A\\\" of line AB is 18mm above HP and 40mm in front of VP and end \\\"B\\\" 15mm behind the VP and 25mm below the HP. The end projectors are 45mm apart. Draw the projections and find TL, θ, φ, HT and VT.
-
Dec 2023 A line \"AB\" is contained by a profile plane. Its end \"A\" is 49 mm in front of VP and II mm above HP and end \"B\" is 7 mm in front of VP and 59 mm above HP. Draw its projection and find TL, 0, 6, HT and VT.
-
-
A regular hexagonal lamina of side 20 mm, perpendicular to HP and lying on HP on one of its sides. The plane is parallel to VP and 20 mm from VP. Draw its projections and show traces.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
Dec 2023 A regular pentagonal lamina ofside 20 mm, perpendicular to HP/and lying on HP on one of its sides. The plane_is parallel to VP and 20 mm from VP/\\Draw its projections and show traces.
-
-
A cone of base diameter 45 mm and axis 58 mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadrant.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
Dec 2025 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
May 2024 A cone of base diameter 48 mm and axis 62 mm long is lying on HP on its generator with | axis parallel to VP/Draw its projections assuming the cone lying in first quadrant.
-
May 2023 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
Dec 2023 A cone of base diameter 50 mm and axis.65>mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadfant.
-
-
Draw isometric drawing of a hexagonal prism of base edge 25mm and axis 62mm long.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
A right regular pentagonal pyramid of base edge 32mm and axis 63mm long rests on its base on the HP such that one of its base edges is perpendicular to VP. Draw its projections.Long Answer 8 Marks Dec-2023 • PTU B-TECH
-
May 2025 A right regular square pyramid of base edge 45 mm and axis 52 mm long, rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.
-
May 2023 A right regular square pyramid of base edge 42mm and axis 65 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.
-
Dec 2023 A right regular square pyramid of base edge 54mm and axis 68 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in Ist quadrant.
-
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.