Solved question paper for EGD Dec-2024 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design Dec-2024
PTU • B-TECH • Mechanical Engineering • 1st-2nd • Dec-2024
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Tech. (AE/AI&ML/AI&DS/IOT/A&R/CE/CSE/DS/EEE/EE/ECE/FT/IT/ ME/Internet of Things and Cyber Security including Block Chain Technology)(Sem.—1,2) ENGINEERING GRAPHICS & DESIGN Subject Code : BTME101-21 M.Code : 91335 Date of Examination : 14-01-2025Short Answer Dec-2024 • PTU B-TECH
-
May 2024 Tech. (AE/AI & ML/ Al & DS/EEE/A&R/CE/CSE/DS/EE/ECE/FT/IT/ME/ “* internet of Things and Cyber Security including Block Chain Technology) (Sem.—1,2) ENGINEERING GRAPHICS & DESIGN Subject Code: BTME101/21 M.Code : 91335 | Date of Examination : 19-06-2024
-
-
SECTION -B & C have FOUR questions each.Short Answer Dec-2024 • PTU B-TECH
-
May 2024 SECTION-B&C have FOUR questions each.
-
Dec 2024 SECTION-B&C have FOUR questions each. yO |
-
Dec 2023 SECTION -B &C. have FOUR questions each.
-
-
Select at least TWO questions from SECTION-B&C.Short Answer Dec-2024 • PTU B-TECH
-
May 2024 Select atleast TWO questions from SECTION -B&C.
-
Dec 2024 Select atleast TWO questions from SECTION-B&C. \' SECTION-A
-
-
Write the following statement using single stroke capital vertical Ictters of 12 mm size: "WHOEVER IS HAPPY WILL MAKE OTHERS HAPPY TOO".Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Write the following statement using single stroke capital vertical letters of 12 mm size: \\\"IWHOVER IS HAPPY WILL MAKE OTHERS HAPPY TOO\\\".
-
-
Explain any two types Lines used in Engineering Drawing.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Explain any two types lines used in Engineering Drawing.
-
Dec 2023 1(a) Explain any two types Lines used in Engineering Drawing.
-
Dec 2023 Explain any two types of Lines used in Engineering Drawing.
-
-
Explain with the help of an example the unidirectional system of placement of dimensions.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Explain with the help of an example the unidirectional system of placement of dimensions.
-
May 2023 Write short notes on :\r\nc) Explain with the help of an example the Unidirectional system of placement of dimensions.
-
Dec 2023 Explain with the help of an example the Unidirectional system of placement of dimensions.
-
-
What is difference between plane scale and diagonal scale?Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write short notes on: f) What is the difference between plain scale and diagonal scale?
-
Dec 2025 What is difference between plane scale and diagonal scale?
-
May 2023 Write short notes on :\r\nd) What is difference between plane scale and diagonal scale?
-
-
Draw a regular Hexagonal Lamina of side 65mm.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Draw a regular Hexagonal Lamina of side 65mm.
-
-
How will you represent Metals and Glass on a drawing sheet?Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 How will you represent Metals and Glass on a drawing sheet?
-
May 2024 How will you represent Liquid and Glass on a drawing sheet?
-
-
Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
Show by means of traces, a plane perpendicular to HP and inclined to VP.Short Answer Dec-2024 • PTU B-TECH
-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Differentiate between Frustum and Truncated solid.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 Differentiate between Frustum and Truncated solid.
-
-
Differentiate Isometric Projections and Isometric Drawing. exams paperShort Answer Dec-2024 • PTU B-TECH
-
May 2025 Write short notes on: a) Explain the terms isometric drawing and isometric projection.
-
Dec 2025 Differentiate Isometric Projections and Isometric Drawing.
-
May 2023 Write short notes on :\r\nb) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 Write briefly: b) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 1(g) Explain the difference between an isometric projection and isometric drawing.
-
-
Aline CD has its end "C" 10 mm above HP and 15 mm in front of VP, End "D" 42 mm above HP and 58 mm in front of VP. The distance between the end projectors, is 48 mm. Draw the projections of the line and find out its true length, true inclinations with principle planes, HT and VT.Short Answer Dec-2024 • PTU B-TECH
-
Dec 2025 A line CD has its end \\\"C\\\" 10 mm above HP and 15 mm in front of VP. End \\\"D\\\" 42 mm above HP and 58 mm in front of VP. The distance between the end projectors is 48 mm. Draw the true length, true inclinations with principal planes, HT and VT.
-
-
A point "M" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line. 5 Construct a Plane Scale of R.F= 1:40 to read meters and decimeters and long enough to measure up to 6m. Indicate 4.4m on the scale.Short Answer Dec-2024 • PTU B-TECH
-
A hexagonal prism of side of base 26mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its | projections.Short Answer Dec-2024 • PTU B-TECH
-
May 2025 A right regular triangular prism of base edge 40mm, axis 65mm long is resting on its rectangular face on HP, with axis parallel to both HP and VP. Draw its projections.
-
Dec 2025 A hexagonal prism of side of base 28mm and length of axis 65mm lies on one of its rectangular faces on HP with axis Perpendicular to VP and parallel to HP. Draw its projections.
-
-
A circular lamina of diameter 42mnvis inclined toy V Pat 44° and perpendicular to HP and it is resting on VP on a point on its circumference. Draw its projections. Also show traces. 8 A cone of base rim-diameter 45mm_and-axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant. 9 Draw the isometric drawing of the Frustum of a right regular hexagonal pyramid, side of the base hexagon is 20 mm, side of top hexagon is 10 mm, and the height of the frustum is 40 mm. NOTE : Disclosure of Identity by writing Mobile No. or Marking of passing request on any paper of Answer Sheet will lead to UMC against the Student. 2 | M-91335 (S1)- 2555Short Answer Dec-2024 • PTU B-TECH
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.