Solved question paper for EGD May-2023 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design May-2023
PTU • B-TECH • Mechanical Engineering • 1st-2nd • May-2023
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Write short notes on :
a) Differentiate between Frustum and Truncated Solid.Very Short Answer 2 Marks May-2023 • PTU B-TECH-
May 2025 Write a short notes on: h) Explain Frustum and Truncated Solids with a suitable drawing.
-
May 2024 Explain Frustum and Truncated Solids with a suitable freehand drawing.
-
Dec 2024 Explain Frustum and Truncated Solids with.a suitable drawing. |
-
-
Write short notes on :
b) Differentiate between Isometric Projections and Isometric View.Very Short Answer 2 Marks May-2023 • PTU B-TECH-
May 2025 Write short notes on: a) Explain the terms isometric drawing and isometric projection.
-
Dec 2025 Differentiate Isometric Projections and Isometric Drawing.
-
Dec 2024 Differentiate Isometric Projections and Isometric Drawing. exams paper
-
Dec 2023 Write briefly: b) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 1(g) Explain the difference between an isometric projection and isometric drawing.
-
-
Write short notes on :
c) Explain with the help of an example the Unidirectional system of placement of dimensions.Very Short Answer 2 Marks May-2023 • PTU B-TECH-
Dec 2025 Explain with the help of an example the unidirectional system of placement of dimensions.
-
Dec 2024 Explain with the help of an example the unidirectional system of placement of dimensions.
-
Dec 2023 Explain with the help of an example the Unidirectional system of placement of dimensions.
-
-
Write short notes on :
d) What is difference between plane scale and diagonal scale?Very Short Answer 2 Marks May-2023 • PTU B-TECH-
May 2025 Write short notes on: f) What is the difference between plain scale and diagonal scale?
-
Dec 2025 What is difference between plane scale and diagonal scale?
-
Dec 2024 What is difference between plane scale and diagonal scale?
-
-
Write short notes on :
e) Explain the types of Dimensions with a suitable drawing.Very Short Answer 2 Marks May-2023 • PTU B-TECH-
May 2025 Write a short notes on: e) Explain the types of methods of Dimensioning with a suitable drawing.
-
May 2024 Explain the methods of placement of Dimensions with a suitable freehand drawing.
-
Dec 2023 Write briefly: e) Explain the types of dimensions with a suitable drawing.
-
Dec 2023 Explain the types of Dimensions with a suitable drawing.
-
-
Write short notes on :
f) Define primary and secondary planes.Very Short Answer 2 Marks May-2023 • PTU B-TECH -
Write short notes on :
g) Give examples (with suitable drawing) of solids of revolution.Very Short Answer 2 Marks May-2023 • PTU B-TECH -
Write short notes on :
h) Show by means of traces, a plane perpendicular to HP and inclined to VP.Very Short Answer 2 Marks May-2023 • PTU B-TECH-
May 2025 Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Write short notes on :
i) Write the following statement using single stroke capital vertical letters of 12 mm size:
“LABORATORY IS A TEMPLE WHERE SEARCH FOR TRUTH IS MADE”Very Short Answer 2 Marks May-2023 • PTU B-TECH -
Write short notes on :
j) Draw a regular Hexagonal Lamina of side 45mm.Very Short Answer 2 Marks May-2023 • PTU B-TECH -
Construct a Plan Scale of R.F.=1/50 to read meters and decimeters and long enough to measure up to 8m. Show 7.4m and 4m 5dm on the scale.Long Answer 8 Marks May-2023 • PTU B-TECH
-
A point "M" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.Long Answer 8 Marks May-2023 • PTU B-TECH
-
May 2025 A point \\\"N\\\" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
May 2025 A point \\\"M\\\" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2025 A point \\\"M\\\" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2024 A point \"E\" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest\'distance from the reference line. .
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"M\\\" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
A line CD, 60 mm long, has its end ‘C’ in HP and 15 mm in front of VP. The line is inclined at 45° to the HP and 30° to the VP. Draw its projection when the end 'D' is in first quadrant. Also find its HT and VT.Long Answer 8 Marks May-2023 • PTU B-TECH
-
Line "AB" is lying on profile plane. Its end "A" is 44mm in front of VP & 12 mm above HP and end "B" is 8mm in front of VP & 52mm above HP. Draw its projection and find, True Length, inclinations with the principle planes, HT and VT.Long Answer 8 Marks May-2023 • PTU B-TECH
-
May 2025 A line \\\"EF\\\" is lying on profile plan. Its end \\\"E\\\" is 45mm in front of VP and 10mm above HP and end \\\"F\\\" is 10mm in front of VP and 50mm above HP. Draw its projections and determine the true length, traces and inclination with the reference planes.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 75mm long, measure 65mm and 50 mm respectively. End A is in HP and 12mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in first quadrant.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant.
-
Dec 2024 Plan and elevation of a line \"AB\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant. : 5. End \"C\" of line\' CD is 13 mm above HP and 51 mm in front of VP and end \"D\" 12 mm behind the VP-and 35 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, 6, ®, HT and VT, : De - SECTION-C 3 |
-
-
A regular hexagonal thin plate of 45mm side has a central circular hole of 45mm diameter at its center. It is resting on one of its corners in HP. Draw its projections when the plate surface is vertical and inclined to VP at 30°.Long Answer 8 Marks May-2023 • PTU B-TECH
-
Dec 2024 A regular hexagonal thin plate of 45mm side is resting on one of its corners in HP, Draw its projections when the plate surface is vertical and inclined to VP at 30°. Also show traces, Assume the said plate lying in first quadrant.
-
-
A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.Long Answer 8 Marks May-2023 • PTU B-TECH
-
Dec 2025 A cone of base rim diameter 45mm and axis 65 mm lying on HP on a point of its circumference such that the generator is perpendicular to HP. Draw its projections assuming the cone lying in first quadrant.
-
May 2024 A cone of base diameter 48 mm and axis 62 mm long is lying on HP on its generator with | axis parallel to VP/Draw its projections assuming the cone lying in first quadrant.
-
Dec 2023 A cone of base diameter 45 mm and axis 58 mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadrant.
-
Dec 2023 A cone of base diameter 50 mm and axis.65>mm long; is lying on HP on a point of its circumference such that its generator is perpendicular to HP. Draw its projections assuming the object lying in first quadfant.
-
-
A right regular square pyramid of base edge 42mm and axis 65 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.Long Answer May-2023 • PTU B-TECH
-
May 2025 A right regular square pyramid of base edge 45 mm and axis 52 mm long, rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in 1st quadrant.
-
Dec 2023 A right regular square pyramid of base edge 54mm and axis 68 mm long; rests on its base on HP with its base edges equally inclined to VP. Draw its projections assuming the pyramid in Ist quadrant.
-
Dec 2023 A right regular pentagonal pyramid of base edge 32mm and axis 63mm long rests on its base on the HP such that one of its base edges is perpendicular to VP. Draw its projections.
-
-
A cube of 25 mm edge is placed centrally on the top of another square block, of 40mm edge and 15mm thick. Draw the isometric drawing of the two solids.Long Answer May-2023 • PTU B-TECH
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.