Solved question paper for EGD May-2025 (B-TECH 1st-2nd)
Solved Question Paper
Engineering Graphics and Design May-2025
PTU • B-TECH • Mechanical Engineering • 1st-2nd • May-2025
Engineering Graphics and Design previous year question papers on BRpaper are organized for students of Punjab Technical University’s Bachelor of Technology program, 1st-2nd semester. This section makes it easier to browse subject-wise old question papers for Engineering Graphics and Design, so students can review how questions are typically framed in past exams and get a sense of the exam pattern. Many students search for engineering graphics and design previous year question paper while preparing for exams, and this page is built to support exactly that kind of subject-wise browsing and revision. BRpaper is not the official website of Punjab Technical University or any institution, and it does not publish official notices or academic updates.
Solved Questions
Solved-
Draw the isometric drawing with the following orthographic projections :Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 Draw isometric Projections of the following :
-
-
A right regular pentagonal prism, edge of base 20mm and height 50 mm has a central circular hole of diameter 20 mm drilled centrally through it, along with its axis. Draw its isometric projection.Long Answer 8 Marks May-2025 • PTU B-TECH
-
A right regular Hexagonal Prism having a base with a 30 mm side and 75 mm long axis has an edge of its base on HR. Its axis is parallel to VP and inclined at 45° to HP. Draw its projections assuming the prism lying in first quadrant.Long Answer 8 Marks May-2025 • PTU B-TECH
-
A Pentagonal plane with a 30mm side has an edge on HP, the surface of the Plane is inclined at 45° to the HP and perpendicular to VP. Draw its Projections assuming the plane in first quadrant.Long Answer 8 Marks May-2025 • PTU B-TECH
-
A line "EF" is lying on profile plan. Its end "E" is 45mm in front of VP and 10mm above HP and end "F" is 10mm in front of VP and 50mm above HP. Draw its projections and determine the true length, traces and inclination with the reference planes.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 Plan and elevation of a line \\\"AB\\\" 75mm long, measure 65mm and 50 mm respectively. End A is in HP and 12mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in first quadrant.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant.
-
Dec 2024 Plan and elevation of a line \"AB\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant. : 5. End \"C\" of line\' CD is 13 mm above HP and 51 mm in front of VP and end \"D\" 12 mm behind the VP-and 35 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, 6, ®, HT and VT, : De - SECTION-C 3 |
-
May 2023 Line \\\"AB\\\" is lying on profile plane. Its end \\\"A\\\" is 44mm in front of VP & 12 mm above HP and end \\\"B\\\" is 8mm in front of VP & 52mm above HP. Draw its projection and find, True Length, inclinations with the principle planes, HT and VT.
-
-
Plan and elevation of a line "AB" 75mm long, measure 65mm and 50 mm respectively. End A is in HP and 12mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in first quadrant.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 A line \\\"EF\\\" is lying on profile plan. Its end \\\"E\\\" is 45mm in front of VP and 10mm above HP and end \\\"F\\\" is 10mm in front of VP and 50mm above HP. Draw its projections and determine the true length, traces and inclination with the reference planes.
-
May 2025 Plan and elevation of a line \\\"AB\\\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant.
-
Dec 2024 Plan and elevation of a line \"AB\" 60mm long, measure 54mm and 45 mm respectively. End A is 15mm from HP and 10mm from VP. Draw its projections and determine its inclinations to the reference planes when the line lies in First quadrant. : 5. End \"C\" of line\' CD is 13 mm above HP and 51 mm in front of VP and end \"D\" 12 mm behind the VP-and 35 mm below the HP. The end projectors are 52 mm apart. Draw the projections and find TL, 6, ®, HT and VT, : De - SECTION-C 3 |
-
May 2023 Line \\\"AB\\\" is lying on profile plane. Its end \\\"A\\\" is 44mm in front of VP & 12 mm above HP and end \\\"B\\\" is 8mm in front of VP & 52mm above HP. Draw its projection and find, True Length, inclinations with the principle planes, HT and VT.
-
-
A point "N" is 68 mm behind VP and 79 mm below HP. Draw its projections and find out its shortest distance from the reference line.Long Answer 8 Marks May-2025 • PTU B-TECH
-
May 2025 A point \\\"M\\\" is 65 mm in front of VP and 52 mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2025 A point \\\"M\\\" is 39mm behind VP and 32mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2024 A point \"E\" is 62 mm in front of VP and 49 mm above HP. Draw its projections and find out its shortest\'distance from the reference line. .
-
May 2023 A point \\\"M\\\" is 31mm behind of VP and 54 mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"P\\\" is 48mm in front of VP and 58mm above HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \\\"M\\\" is 56mm behind VP and 42mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
Dec 2023 A point \"G\" Is 31mm behind VP and 45mm below HP. Draw its projections and find out its shortest distance from the reference line.
-
-
On a plan, a line 22cm long represents a distance of 440m. Draw a Diagonal Scale to read up to single meter. Mark 287m on the scale.Long Answer 8 Marks May-2025 • PTU B-TECH
-
Write short notes on: j) Explain the following terms with a suitable freehand drawing: Apex, Slant Height, Base Rim and Generator.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2023 Write briefly: a) Explain the following terms with a suitable drawing: Apex, Slant Height, Base Rim and Generator.
-
Dec 2023 1(b) Explain the following terms with a suitable drawing: Apex, Slant Height, Base Rim and Generator.
-
Dec 2023 Explain thefollowing terms with a suitable drawing: Apex, Slant Height, Base Rim and Generators
-
-
Write the following statement using single stroke capital vertical letters of 12 mm size : "BE THE CHANGE THAT YOU WISH TO SEE IN THE WORLD".Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write short notes on: h) Explain with the help of a simple sketch (i) size dimensions (ii) location dimensions.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write short notes on: g) What are the standard sizes of drawing sheets?Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write short notes on: f) What is the difference between plain scale and diagonal scale?Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2025 What is difference between plane scale and diagonal scale?
-
Dec 2024 What is difference between plane scale and diagonal scale?
-
May 2023 Write short notes on :\r\nd) What is difference between plane scale and diagonal scale?
-
-
Write short notes on: e) Name the methods to determine the true length and true inclinations of a straight line.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write short notes on: d) How will you represent Liquid and Wood on a drawing sheet?Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Write short notes on: c) Draw projections of a line lying on HP and inclined to VP with the help of a suitable free hand drawing. Also, show traces.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2025 Write a short notes on: f) Draw the projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2025 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
May 2024 Draw projections ofa line inclined to VP and lying on HP with a suitable freehand drawing. Also, show traces. ;
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand - drawing. Assume suitable dimensions. Also, show traces. ~
-
Dec 2024 Draw projections of a line inclined to HP and parallel to VP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 Write briefly: f) Draw projections of a line inclined to VP and parallel to HP with a suitable freehand drawing. Assume suitable dimensions. Also, show traces.
-
Dec 2023 1(j) Draw projections of a line inclined to VP and parallel to HP with a suitable free hand drawing. Also, show traces.
-
Dec 2023 Draw projections of @ line inclined to HP and parallel to VP with a suitable freehand == drawing. Also, show*traces.
-
-
Write short notes on: b) Show by means of traces, a plane inclined to HP and perpendicular to VP.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
May 2025 Write a short notes on: b) Show by the means of traces, a plane perpendicular to both HP and VP.
-
Dec 2025 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2024 Show by means of traces, a plane perpendicular to VP and HP.
-
Dec 2024 Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
May 2023 Write short notes on :\r\nh) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Write briefly: h) Show by means of traces, a plane perpendicular to VP and inclined to HP.
-
Dec 2023 1(h) Show by means of traces, a plane perpendicular to HP and inclined to VP.
-
Dec 2023 Show by means of traces, a plane perpendicular to VP and inClined to HP.
-
-
Write short notes on: a) Explain the terms isometric drawing and isometric projection.Very Short Answer 2 Marks May-2025 • PTU B-TECH
-
Dec 2025 Differentiate Isometric Projections and Isometric Drawing.
-
Dec 2024 Differentiate Isometric Projections and Isometric Drawing. exams paper
-
May 2023 Write short notes on :\r\nb) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 Write briefly: b) Differentiate between Isometric Projections and Isometric View.
-
Dec 2023 1(g) Explain the difference between an isometric projection and isometric drawing.
-
Explore all data
FAQ
Frequently Asked Questions
Answers about this subject, solved papers, and preparation.
01 Where can I find Engineering Graphics and Design previous year question papers for Bachelor of Technology, 1st-2nd semester?
This page lists Engineering Graphics and Design question papers uploaded for Punjab Technical University Bachelor of Technology, 1st-2nd semester, organized for subject-wise browsing where available.
02 Are these official Punjab Technical University question papers?
BRpaper is not the official website of Punjab Technical University. These papers are shared for reference and revision purposes only and are not official university material.
03 How can previous year Engineering Graphics and Design papers help in exam preparation?
Reviewing past papers can help you understand how questions are typically framed, notice commonly repeated topics, and get a sense of the exam pattern before your own exam.
04 What kind of topics does Engineering Graphics and Design usually cover?
The question papers here relate to the official Engineering Graphics and Design syllabus set by the university for this course and semester.
05 Does this page include a Engineering Graphics and Design previous year question paper or solved answers?
This page focuses on providing access to the previous year question papers themselves. A separate question bank or solved answers may not be available for every paper.
06 Can I find papers for other subjects in the same Bachelor of Technology?
Yes, BRpaper organizes papers by university, course, stream, and semester, so you can browse other subjects within the same Punjab Technical University Bachelor of Technology.